vs.

      Case CX15B serie 2 vs. Case CX27B

      3 reasons to buy Case CX15B serie 2:

      Operation

      Generator current strength 40 amperes and 20 amperes 50 % more or 20 amperes
      Hydraulic pump flow rate 15.5 l/min and 52.8 l/min 71 % less or 37.3 l/min

      Motor

      Torque measured at 1800 rev / min and 1320 rev / min 27 % more or 480 rev

      16 reasons to buy Case CX27B:

      Sizes

      Counterweight ground clearance 520 mm and 440 mm 15 % more or 80 mm
      Width to outside of caterpillar track 1500 mm and 990 mm 34 % more or 510 mm

      Operation

      Fuel Capacity 28 l. and 19.5 l. 30 % more or 8.5 l.
      Cooling system fluid volume 3.8 l. and 3.5 l. 8 % more or 0.3 l.
      Hydraulic system fluid volume 25 l. and 12.3 l. 51 % more or 12.7 l.
      Engine oil volume 5.5 l. and 3 l. 45 % more or 2.5 l.
      Hydraulic system overflow valve pressure 23000.9 kPa and 20600 kPa 10 % more or 2400.9 kPa

      Motor

      Maximum torque 79 Nm and 53.5 Nm 32 % more or 25.5 Nm
      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Carrier

      Specific ground pressure 28 kPa and 30 kPa 7 % less or 2 kPa
      Rolling bearings number on either side 4 and 3 25 % more or 1
      Maximum travel speed 4.1 km/h and 3.5 km/h 15 % more or 0.6 km/h

      Booms/sections features 1

      Maximum excavation depth 2540 mm and 2200 mm 13 % more or 340 mm
      Maximum radius along ground level 4510 mm and 3705 mm 18 % more or 805 mm
      Maximum loading height 3170 mm and 2470 mm 22 % more or 700 mm
      Maximum vertical wall digging depth 2320 mm and 2060 mm 11 % more or 260 mm

      Neutral reasons:

      Sizes

      Rear platform swing radius 1060 mm and 750 mm
      Caterpillar track length on ground level 1210 mm and 1590 mm
      Height to cab upper part 2350 mm and 2500 mm

      Operation

      Working weight 1700 kg and 2520 kg
      Operating voltage 12 V and 12 V

      Motor

      Model L3E and 3TNV82-A-SYB
      Cylinders number 3 and 3
      Manufacturer Mitsubishi and Yanmar

      Carrier

      Shoe dimensions 230 mm and 250 mm

      Booms/sections features 1

      Unit load-transfer height 2350 mm and 2500 mm
      Unit load-transfer length 3600 mm and 4130 mm
      Maximum cut height 3550 mm and 4470 mm

      Images

      Sizes

      15. Counterweight ground clearance 440 mm 15. Counterweight ground clearance 520 mm
      2. Width to outside of caterpillar track 990 mm 2. Width to outside of caterpillar track 1500 mm
      4. Caterpillar track length on ground level 1210 mm 4. Caterpillar track length on ground level 1590 mm
      7. Height to cab upper part 2350 mm 7. Height to cab upper part 2500 mm
      8. Rear platform swing radius 1060 mm 8. Rear platform swing radius 750 mm

      Carrier

      14. Shoe dimensions 230 mm 14. Shoe dimensions 250 mm

      Booms/sections features 1

      9. Maximum cut height 3675 mm 9. Maximum cut height 4470 mm
      10. Maximum loading height 2595 mm 10. Maximum loading height 3170 mm
      11. Maximum radius along ground level 3900 mm 11. Maximum radius along ground level 4510 mm
      12. Maximum vertical wall digging depth 2260 mm 12. Maximum vertical wall digging depth 2320 mm
      13. Maximum excavation depth 2400 mm 13. Maximum excavation depth 2540 mm
      1. Unit load-transfer length 3600 mm 1. Unit load-transfer length 4130 mm
      3. Unit load-transfer height 2350 mm 3. Unit load-transfer height 2500 mm