vs.

      Case CX18B serie 2 vs. Doosan DX35Z

      3 reasons to buy Case CX18B serie 2:

      Operation

      Hydraulic pump flow rate 15.5 l/min and 77 l/min 80 % less or 61.5 l/min

      Motor

      Torque measured at 1800 rev / min and 1200 rev / min 33 % more or 600 rev

      Carrier

      Specific ground pressure 31 kPa and 31.7 kPa 2 % less or 0.7 kPa

      18 reasons to buy Doosan DX35Z:

      Sizes

      Width to outside of caterpillar track 1700 mm and 1330 mm 22 % more or 370 mm
      Counterweight ground clearance 576 mm and 440 mm 24 % more or 136 mm

      Operation

      Engine oil volume 6.3 l. and 3 l. 52 % more or 3.3 l.
      Hydraulic system overflow valve pressure 22500 kPa and 21600 kPa 4 % more or 900 kPa
      Fuel Capacity 42 l. and 19.5 l. 54 % more or 22.5 l.
      Cooling system fluid volume 5 l. and 3.5 l. 30 % more or 1.5 l.
      Hydraulic system fluid volume 45 l. and 12.3 l. 73 % more or 32.7 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev
      Maximum torque 110 Nm and 53.5 Nm 51 % more or 56.5 Nm
      Full power 20.3 kW and 11.2 kW 45 % more or 9.1 kW

      Carrier

      Rolling bearings number on either side 4 and 3 25 % more or 1
      Maximum travel speed 4.6 km/h and 3.5 km/h 24 % more or 1.1 km/h

      Booms/sections features 2

      Maximum excavation depth 3155 mm and 2400 mm 24 % more or 755 mm
      Maximum loading height 3410 mm and 2600 mm 24 % more or 810 mm
      Maximum vertical wall digging depth 2630 mm and 2260 mm 14 % more or 370 mm

      Booms/sections features 1

      Maximum loading height 3350 mm and 2470 mm 26 % more or 880 mm
      Maximum vertical wall digging depth 2560 mm and 2060 mm 20 % more or 500 mm
      Maximum excavation depth 3025 mm and 2200 mm 27 % more or 825 mm

      Neutral reasons:

      Sizes

      Height to cab upper part 2350 mm and 2515 mm
      Rear platform swing radius 1060 mm and 1060 mm
      Caterpillar track length on ground level 1210 mm and 1700 mm

      Operation

      Operating voltage 12 V and 12 V
      Generator current strength 40 amperes and 40 amperes
      Working weight 1780 kg and 3660 kg

      Motor

      Manufacturer Mitsubishi and Yanmar
      Cylinders number 3 and 3
      Model L3E and 3TNV88

      Carrier

      Shoe dimensions 230 mm and 300 mm
      Track width 1100 mm and 1400 mm

      Booms/sections features 2

      Maximum cut height 3680 mm and 4880 mm

      Booms/sections features 1

      Unit load-transfer height 2350 mm and 1720 mm
      Unit load-transfer length 3600 mm and 4645 mm
      Maximum cut height 3550 mm and 4840 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 1330 mm 2. Width to outside of caterpillar track 1700 mm
      4. Caterpillar track length on ground level 1210 mm 4. Caterpillar track length on ground level 1700 mm
      7. Height to cab upper part 2350 mm 7. Height to cab upper part 2515 mm
      8. Rear platform swing radius 1060 mm 8. Rear platform swing radius 1060 mm
      15. Counterweight ground clearance 440 mm 15. Counterweight ground clearance 576 mm

      Carrier

      6. Track width 1100 mm 6. Track width 1400 mm
      14. Shoe dimensions 230 mm 14. Shoe dimensions 300 mm

      Booms/sections features 1

      9. Maximum cut height 3680 mm 9. Maximum cut height 4880 mm
      10. Maximum loading height 2600 mm 10. Maximum loading height 3410 mm
      12. Maximum vertical wall digging depth 2260 mm 12. Maximum vertical wall digging depth 2630 mm
      13. Maximum excavation depth 2400 mm 13. Maximum excavation depth 3155 mm
      1. Unit load-transfer length 3620 mm 1. Unit load-transfer length 4645 mm
      3. Unit load-transfer height 2350 mm 3. Unit load-transfer height 1720 mm