- Home/
- Comparison/
- Mini Digger/
- Case CX25 vs. Case CX31B ZTS
Case CX25 vs. Case CX31B ZTS
4 reasons to buy Case CX25:
Swing device
Rotation speed | 9.4 rev / min and 9 rev / min | 4 % more or 0.4 rev |
Operation
Hydraulic pump flow rate | 48 l/min and 97 l/min | 51 % less or 49 l/min |
Motor
Torque measured at | 1700 rev / min and 1440 rev / min | 15 % more or 260 rev |
Booms/sections features 1
Maximum vertical wall digging depth | 2420 mm and 2160 mm | 11 % more or 260 mm |
17 reasons to buy Case CX31B ZTS:
Sizes
Counterweight ground clearance | 570 mm and 480 mm | 16 % more or 90 mm |
Width to outside of caterpillar track | 1550 mm and 1500 mm | 3 % more or 50 mm |
Clearance | 330 mm and 240 mm | 27 % more or 90 mm |
Operation
Fuel Capacity | 38 l. and 25 l. | 34 % more or 13 l. |
Cooling system fluid volume | 4.6 l. and 2.7 l. | 41 % more or 1.9 l. |
Hydraulic system fluid volume | 48 l. and 42 l. | 12 % more or 6 l. |
Engine oil volume | 6.7 l. and 3.5 l. | 48 % more or 3.2 l. |
Generator current strength | 24 amperes and 20 amperes | 17 % more or 4 amperes |
Hydraulic system overflow valve pressure | 23000 kPa and 156.9 kPa | 99 % more or 22843.1 kPa |
Motor
Displacement | 1.6 l. and 1 l. | 37 % more or 0.6 l. |
Maximum torque | 98.4 Nm and 65.6 Nm | 33 % more or 32.8 Nm |
Cylinders number | 4 and 3 | 25 % more or 1 |
Effective power | 22.4 kW and 13.2 kW | 41 % more or 9.2 kW |
Carrier
Maximum travel speed | 4.5 km/h and 4.3 km/h | 4 % more or 0.2 km/h |
Booms/sections features 1
Maximum excavation depth | 2810 mm and 2560 mm | 9 % more or 250 mm |
Maximum radius along ground level | 4930 mm and 4550 mm | 8 % more or 380 mm |
Maximum loading height | 3360 mm and 3270 mm | 3 % more or 90 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 750 mm and 775 mm |
Caterpillar track length on ground level | 1500 mm and 1540 mm |
Height to cab upper part | 2400 mm and 2570 mm |
Operation
Working weight | 2520.2 kg and 3030 kg |
Operating voltage | 12 V and 12 V |
Motor
Power measured at | 2400 rev / min and 2400 rev / min |
Manufacturer | Yanmar and Yanmar |
Model | 3TNE74 and 3TNV88-BPYB |
Carrier
Rolling bearings number on either side | 4 and 4 |
Specific ground pressure | 30 kPa and 30 kPa |
Shoe dimensions | 250 mm and 300 mm |
Booms/sections features 1
Unit load-transfer height | 2400 mm and 2570 mm |
Unit load-transfer length | 4130 mm and 4390 mm |
Maximum cut height | 4520 mm and 4770 mm |
Images
Sizes
2. Width to outside of caterpillar track | 1500 mm | 2. Width to outside of caterpillar track | 1550 mm |
4. Caterpillar track length on ground level | 1500 mm | 4. Caterpillar track length on ground level | 1540 mm |
5. Clearance | 240 mm | 5. Clearance | 330 mm |
7. Height to cab upper part | 2400 mm | 7. Height to cab upper part | 2570 mm |
8. Rear platform swing radius | 750 mm | 8. Rear platform swing radius | 775 mm |
15. Counterweight ground clearance | 480 mm | 15. Counterweight ground clearance | 570 mm |
Carrier
14. Shoe dimensions | 250 mm | 14. Shoe dimensions | 300 mm |
Booms/sections features 1
10. Maximum loading height | 3270 mm | 10. Maximum loading height | 3550 mm |
11. Maximum radius along ground level | 4550 mm | 11. Maximum radius along ground level | 5200 mm |
12. Maximum vertical wall digging depth | 2420 mm | 12. Maximum vertical wall digging depth | 2430 mm |
13. Maximum excavation depth | 2560 mm | 13. Maximum excavation depth | 3100 mm |
1. Unit load-transfer length | 4130 mm | 1. Unit load-transfer length | 4390 mm |
3. Unit load-transfer height | 2400 mm | 3. Unit load-transfer height | 2570 mm |
9. Maximum cut height | 4520 mm | 9. Maximum cut height | 4770 mm |