vs.

      Case CX25 vs. Hitachi ZX35U-2

      4 reasons to buy Case CX25:

      Swing device

      Rotation speed 9.4 rev / min and 9.3 rev / min 1 % more or 0.1 rev

      Operation

      Hydraulic pump flow rate 48 l/min and 80 l/min 40 % less or 32 l/min

      Motor

      Torque measured at 1700 rev / min and 1500 rev / min 12 % more or 200 rev

      Carrier

      Specific ground pressure 30 kPa and 31 kPa 3 % less or 1 kPa

      16 reasons to buy Hitachi ZX35U-2:

      Sizes

      Counterweight ground clearance 560 mm and 480 mm 14 % more or 80 mm
      Width to outside of caterpillar track 1740 mm and 1500 mm 14 % more or 240 mm
      Clearance 290 mm and 240 mm 17 % more or 50 mm

      Operation

      Fuel Capacity 40 l. and 25 l. 37 % more or 15 l.
      Cooling system fluid volume 6 l. and 2.7 l. 55 % more or 3.3 l.
      Hydraulic system fluid volume 58 l. and 42 l. 28 % more or 16 l.
      Engine oil volume 7.2 l. and 3.5 l. 51 % more or 3.7 l.
      Hydraulic system overflow valve pressure 24500 kPa and 156.9 kPa 99 % more or 24343.1 kPa

      Motor

      Power measured at 2500 rev / min and 2400 rev / min 4 % more or 100 rev
      Displacement 1.6 l. and 1 l. 37 % more or 0.6 l.
      Maximum torque 105 Nm and 65.6 Nm 38 % more or 39.4 Nm
      Effective power 22.3 kW and 13.2 kW 41 % more or 9.1 kW

      Carrier

      Maximum travel speed 4.5 km/h and 4.3 km/h 4 % more or 0.2 km/h

      Booms/sections features 1

      Maximum excavation depth 3060 mm and 2560 mm 16 % more or 500 mm
      Maximum loading height 3490 mm and 3270 mm 6 % more or 220 mm
      Maximum vertical wall digging depth 2670 mm and 2420 mm 9 % more or 250 mm

      Neutral reasons:

      Sizes

      Rear platform swing radius 750 mm and 870 mm
      Caterpillar track length on ground level 1500 mm and 1650 mm
      Height to cab upper part 2400 mm and 2460 mm

      Operation

      Working weight 2520.2 kg and 3480 kg
      Operating voltage 12 V and 12 V

      Motor

      Manufacturer Yanmar and Yanmar
      Model 3TNE74 and 3TNV88
      Cylinders number 3 and 3

      Carrier

      Rolling bearings number on either side 4 and 4
      Shoe dimensions 250 mm and 300 mm

      Booms/sections features 1

      Unit load-transfer height 2400 mm and 2460 mm
      Unit load-transfer length 4130 mm and 4650 mm
      Maximum cut height 4520 mm and 4900 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 1500 mm 2. Width to outside of caterpillar track 1740 mm
      4. Caterpillar track length on ground level 1500 mm 4. Caterpillar track length on ground level 1650 mm
      5. Clearance 240 mm 5. Clearance 290 mm
      7. Height to cab upper part 2400 mm 7. Height to cab upper part 2460 mm
      8. Rear platform swing radius 750 mm 8. Rear platform swing radius 870 mm
      15. Counterweight ground clearance 480 mm 15. Counterweight ground clearance 560 mm

      Carrier

      14. Shoe dimensions 250 mm 14. Shoe dimensions 300 mm

      Booms/sections features 1

      13. Maximum excavation depth 2560 mm 13. Maximum excavation depth 3460 mm
      1. Unit load-transfer length 4130 mm 1. Unit load-transfer length 4780 mm
      3. Unit load-transfer height 2400 mm 3. Unit load-transfer height 2460 mm
      9. Maximum cut height 4520 mm 9. Maximum cut height 5010 mm
      10. Maximum loading height 3270 mm 10. Maximum loading height 3600 mm
      12. Maximum vertical wall digging depth 2420 mm 12. Maximum vertical wall digging depth 3020 mm