vs.

      Case CX36 vs. Hitachi EX30-2

      9 reasons to buy Case CX36:

      Sizes

      Width to outside of caterpillar track 1700 mm and 1520 mm 11 % more or 180 mm
      Counterweight ground clearance 570 mm and 565 mm 1 % more or 5 mm

      Operation

      Hydraulic system fluid volume 48 l. and 40 l. 17 % more or 8 l.
      Hydraulic pump flow rate 69.6 l/min and 72 l/min 3 % less or 2.4 l/min

      Motor

      Effective power 17.7 kW and 17.3 kW 2 % more or 0.4 kW
      Power measured at 2400 rev / min and 2000 rev / min 17 % more or 400 rev

      Booms/sections features 1

      Maximum excavation depth 3100 mm and 2885 mm 7 % more or 215 mm
      Maximum radius along ground level 5060 mm and 4810 mm 5 % more or 250 mm
      Maximum vertical wall digging depth 2320 mm and 2175 mm 6 % more or 145 mm

      12 reasons to buy Hitachi EX30-2:

      Swing device

      Rotation speed 9 rev / min and 8.6 rev / min 4 % more or 0.4 rev

      Sizes

      Clearance 330 mm and 320 mm 3 % more or 10 mm

      Operation

      Cooling system fluid volume 6 l. and 2.7 l. 55 % more or 3.3 l.
      Engine oil volume 6.2 l. and 3.7 l. 40 % more or 2.5 l.
      Generator current strength 52 amperes and 24 amperes 54 % more or 28 amperes
      Hydraulic system overflow valve pressure 22555.3 kPa and 156.9 kPa 99 % more or 22398.4 kPa
      Fuel Capacity 50 l. and 3.7 l. 93 % more or 46.3 l.

      Motor

      Displacement 1.5 l. and 1.3 l. 13 % more or 0.2 l.
      Maximum torque 91.1 Nm and 79.5 Nm 13 % more or 11.6 Nm
      Cylinders number 4 and 3 25 % more or 1

      Carrier

      Specific ground pressure 26.5 kPa and 31 kPa 15 % less or 4.5 kPa

      Booms/sections features 1

      Maximum loading height 3415 mm and 3220 mm 6 % more or 195 mm

      Neutral reasons:

      Sizes

      Height to cab upper part 2510 mm and 2440 mm
      Rear platform swing radius 850 mm and 1360 mm
      Caterpillar track length on ground level 1700 mm and 1595 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 3509.9 kg and 2880 kg

      Motor

      Manufacturer Yanmar and Kubota
      Model 3TNE82A and V1505-KA
      Torque measured at 1500 rev / min and 1500 rev / min

      Carrier

      Shoe dimensions 299.7 mm and 300 mm
      Support rollers number on either side 1 and 1
      Rolling bearings number on either side 4 and 4
      Maximum travel speed 4.5 km/h and 4.5 km/h

      Booms/sections features 1

      Unit load-transfer height 2510 mm and 2440 mm
      Maximum cut height 4530 mm and 4745 mm
      Unit load-transfer length 4720 mm and 4680 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 1700 mm 2. Width to outside of caterpillar track 1520 mm
      4. Caterpillar track length on ground level 1700 mm 4. Caterpillar track length on ground level 1595 mm
      5. Clearance 320 mm 5. Clearance 330 mm
      7. Height to cab upper part 2510 mm 7. Height to cab upper part 2440 mm
      8. Rear platform swing radius 850 mm 8. Rear platform swing radius 1360 mm
      15. Counterweight ground clearance 570 mm 15. Counterweight ground clearance 565 mm

      Carrier

      14. Shoe dimensions 299.7 mm 14. Shoe dimensions 300 mm

      Booms/sections features 1

      1. Unit load-transfer length 4720 mm 1. Unit load-transfer length 4680 mm
      3. Unit load-transfer height 2510 mm 3. Unit load-transfer height 2440 mm
      9. Maximum cut height 4530 mm 9. Maximum cut height 4745 mm
      10. Maximum loading height 3220 mm 10. Maximum loading height 3415 mm
      11. Maximum radius along ground level 5060 mm 11. Maximum radius along ground level 4810 mm
      12. Maximum vertical wall digging depth 2320 mm 12. Maximum vertical wall digging depth 2175 mm
      13. Maximum excavation depth 3100 mm 13. Maximum excavation depth 2885 mm