- Home/
- Comparison/
- Mini Digger/
- Case CX36B ZTS vs. Komatsu PC27MR-2
Case CX36B ZTS vs. Komatsu PC27MR-2
8 reasons to buy Case CX36B ZTS:
Sizes
Width to outside of caterpillar track | 1700 mm and 1550 mm | 9 % more or 150 mm |
Counterweight ground clearance | 570 mm and 545 mm | 4 % more or 25 mm |
Operation
Hydraulic system fluid volume | 48 l. and 30 l. | 37 % more or 18 l. |
Engine oil volume | 6.7 l. and 5.7 l. | 15 % more or 1.0 l. |
Motor
Displacement | 1.6 l. and 1.3 l. | 19 % more or 0.3 l. |
Booms/sections features 1
Maximum radius along ground level | 5240 mm and 4550 mm | 13 % more or 690 mm |
Maximum vertical wall digging depth | 2390 mm and 2185 mm | 9 % more or 205 mm |
Maximum excavation depth | 3080 mm and 2650 mm | 14 % more or 430 mm |
10 reasons to buy Komatsu PC27MR-2:
Swing device
Rotation speed | 9.2 rev / min and 9 rev / min | 2 % more or 0.2 rev |
Operation
Generator current strength | 40 amperes and 24 amperes | 40 % more or 16 amperes |
Fuel Capacity | 44 l. and 38 l. | 14 % more or 6 l. |
Hydraulic system overflow valve pressure | 250 kPa and 159.7 kPa | 36 % more or 90.3 kPa |
Hydraulic pump flow rate | 75.6 l/min and 76.8 l/min | 2 % less or 1.2 l/min |
Motor
Power measured at | 2600 rev / min and 2000 rev / min | 23 % more or 600 rev |
Carrier
Hook traction force | 31.4 kN and 38.5 kN | 18 % less or 7.1 kN |
Specific ground pressure | 29.6 kPa and 32 kPa | 7 % less or 2.4 kPa |
Maximum travel speed | 4.6 km/h and 4.5 km/h | 2 % more or 0.1 km/h |
Booms/sections features 1
Maximum loading height | 3230 mm and 3040 mm | 6 % more or 190 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2570 mm and 2530 mm |
Rear platform swing radius | 850 mm and 955 mm |
Caterpillar track length on ground level | 1700 mm and 1485 mm |
Operation
Operating voltage | 12 V and 12 V |
Working weight | 3840 kg and 2990 kg |
Motor
Manufacturer | Yanmar and Komatsu |
Model | 3TNV88-BPYB and 3D82AE |
Carrier
Track width | 1400 mm and 1250 mm |
Shoe dimensions | 300 mm and 300 mm |
Support rollers number on either side | 1 and 1 |
Rolling bearings number on either side | 4 and 4 |
Booms/sections features 1
Maximum cut height | 4370 mm and 4500 mm |
Unit load-transfer height | 2570 mm and 2530 mm |
Unit load-transfer length | 4710 mm and 4320 mm |
Images
Sizes
2. Width to outside of caterpillar track | 1700 mm | 2. Width to outside of caterpillar track | 1550 mm |
4. Caterpillar track length on ground level | 1700 mm | 4. Caterpillar track length on ground level | 1485 mm |
7. Height to cab upper part | 2570 mm | 7. Height to cab upper part | 2530 mm |
8. Rear platform swing radius | 850 mm | 8. Rear platform swing radius | 955 mm |
15. Counterweight ground clearance | 570 mm | 15. Counterweight ground clearance | 545 mm |
Carrier
6. Track width | 1400 mm | 6. Track width | 1250 mm |
14. Shoe dimensions | 300 mm | 14. Shoe dimensions | 300 mm |
Booms/sections features 1
1. Unit load-transfer length | 4710 mm | 1. Unit load-transfer length | 4320 mm |
3. Unit load-transfer height | 2570 mm | 3. Unit load-transfer height | 2530 mm |
9. Maximum cut height | 4490 mm | 9. Maximum cut height | 4500 mm |
10. Maximum loading height | 3150 mm | 10. Maximum loading height | 3230 mm |
11. Maximum radius along ground level | 5500 mm | 11. Maximum radius along ground level | 4550 mm |
12. Maximum vertical wall digging depth | 2650 mm | 12. Maximum vertical wall digging depth | 2185 mm |
13. Maximum excavation depth | 3350 mm | 13. Maximum excavation depth | 2650 mm |