- Home/
- Comparison/
- Mini Digger/
- Case CX40B vs. Komatsu PC18MR-3
Case CX40B vs. Komatsu PC18MR-3
9 reasons to buy Case CX40B:
Sizes
Width to outside of caterpillar track | 1960 mm and 980 mm | 50 % more or 980 mm |
Operation
Fuel Capacity | 53 l. and 19 l. | 64 % more or 34 l. |
Cooling system fluid volume | 6 l. and 3.1 l. | 48 % more or 2.9 l. |
Hydraulic system fluid volume | 63 l. and 15.2 l. | 76 % more or 47.8 l. |
Engine oil volume | 7.4 l. and 3.3 l. | 55 % more or 4.1 l. |
Motor
Effective power | 32.1 kW and 11.2 kW | 65 % more or 20.9 kW |
Booms/sections features 1
Maximum excavation depth | 3390 mm and 2160 mm | 36 % more or 1230 mm |
Maximum radius along ground level | 5510 mm and 3935 mm | 29 % more or 1575 mm |
Maximum vertical wall digging depth | 2630 mm and 1785 mm | 32 % more or 845 mm |
3 reasons to buy Komatsu PC18MR-3:
Swing device
Rotation speed | 8.9 rev / min and 8.8 rev / min | 1 % more or 0.1 rev |
Operation
Hydraulic pump flow rate | 54.3 l/min and 57 l/min | 5 % less or 2.7 l/min |
Carrier
Maximum travel speed | 4.3 km/h and 4.2 km/h | 2 % more or 0.1 km/h |
Neutral reasons:
Sizes
Height to cab upper part | 2600 mm and 2410 mm |
Rear platform swing radius | 980 mm and 715 mm |
Motor
Manufacturer | Yanmar and Komatsu |
Model | 4TNV88A-XYB and 3D67E-2 |
Carrier
Track width | 1560 mm and 750 mm |
Images
Sizes
2. Width to outside of caterpillar track | 1960 mm | 2. Width to outside of caterpillar track | 980 mm |
7. Height to cab upper part | 2600 mm | 7. Height to cab upper part | 2410 mm |
8. Rear platform swing radius | 980 mm | 8. Rear platform swing radius | 715 mm |
Carrier
6. Track width | 1560 mm | 6. Track width | 750 mm |
Booms/sections features 1
11. Maximum radius along ground level | 5510 mm | 11. Maximum radius along ground level | 3935 mm |
12. Maximum vertical wall digging depth | 2630 mm | 12. Maximum vertical wall digging depth | 1785 mm |
13. Maximum excavation depth | 3390 mm | 13. Maximum excavation depth | 2160 mm |