- Home/
- Comparison/
- Mini Digger/
- Gehl 383Z vs. John Deere 27 ZTS
Gehl 383Z vs. John Deere 27 ZTS
8 reasons to buy Gehl 383Z:
Swing device
Rotation speed | 8.8 rev / min and 8.1 rev / min | 8 % more or 0.7 rev |
Operation
Fuel Capacity | 44 l. and 39.7 l. | 10 % more or 4.3 l. |
Hydraulic system fluid volume | 45 l. and 29.9 l. | 34 % more or 15.1 l. |
Generator current strength | 71 amperes and 35 amperes | 51 % more or 36 amperes |
Motor
Displacement | 1.6 l. and 1.5 l. | 6 % more or 0.1 l. |
Booms/sections features 1
Maximum excavation depth | 3360 mm and 2642.6 mm | 21 % more or 717.4 mm |
Maximum loading height | 3350 mm and 2767.6 mm | 17 % more or 582.4 mm |
Maximum vertical wall digging depth | 2670 mm and 2642.6 mm | 1 % more or 27.4 mm |
5 reasons to buy John Deere 27 ZTS:
Sizes
Clearance | 359.7 mm and 280 mm | 22 % more or 79.7 mm |
Operation
Hydraulic pump flow rate | 45.4 l/min and 118.1 l/min | 62 % less or 72.7 l/min |
Motor
Power measured at | 2450 rev / min and 2400 rev / min | 2 % more or 50 rev |
Carrier
Specific ground pressure | 29.1 kPa and 33.1 kPa | 12 % less or 4.0 kPa |
Maximum travel speed | 4.7 km/h and 4.6 km/h | 2 % more or 0.1 km/h |
Neutral reasons:
Sizes
Rear platform swing radius | 870 mm and 786.4 mm |
Caterpillar track length on ground level | 1702 mm and 1929.4 mm |
Height to cab upper part | 2500 mm and 2539 mm |
Operation
Working weight | 3629.6 kg and 2884.8 kg |
Operating voltage | 12 V and 12 V |
Motor
Manufacturer | EP and Isuzu |
Model | Yanmar 3TNV88-PNS, A 2 level and 3LD1 |
Booms/sections features 1
Unit load-transfer length | 4800 mm and 1167.4 mm |
Maximum cut height | 4660 mm and 4242.8 mm |
Images
Sizes
8. Rear platform swing radius | 870 mm | 8. Rear platform swing radius | 786.4 mm |
4. Caterpillar track length on ground level | 1702 mm | 4. Caterpillar track length on ground level | 1929.4 mm |
5. Clearance | 280 mm | 5. Clearance | 359.7 mm |
7. Height to cab upper part | 2500 mm | 7. Height to cab upper part | 2539 mm |
Booms/sections features 1
1. Unit load-transfer length | 4800 mm | 1. Unit load-transfer length | 1167.4 mm |
9. Maximum cut height | 4660 mm | 9. Maximum cut height | 4242.8 mm |
10. Maximum loading height | 3350 mm | 10. Maximum loading height | 2767.6 mm |
12. Maximum vertical wall digging depth | 2670 mm | 12. Maximum vertical wall digging depth | 2642.6 mm |
13. Maximum excavation depth | 3360 mm | 13. Maximum excavation depth | 2642.6 mm |