- Home/
- Comparison/
- Mini Digger/
- Hyundai R22-7 vs. John Deere 27C ZTS
Hyundai R22-7 vs. John Deere 27C ZTS
2 reasons to buy Hyundai R22-7:
Swing device
Rotation speed | 11.5 rev / min and 8.9 rev / min | 23 % more or 2.6 rev |
Operation
Hydraulic system fluid volume | 33 l. and 29.9 l. | 9 % more or 3.1 l. |
10 reasons to buy John Deere 27C ZTS:
Sizes
Width to outside of caterpillar track | 1548.4 mm and 1380 mm | 11 % more or 168.4 mm |
Operation
Fuel Capacity | 39.7 l. and 29 l. | 27 % more or 10.7 l. |
Hydraulic pump flow rate | 47.7 l/min and 63.4 l/min | 25 % less or 15.7 l/min |
Motor
Power measured at | 2450 rev / min and 2400 rev / min | 2 % more or 50 rev |
Carrier
Specific ground pressure | 26.2 kPa and 33.1 kPa | 21 % less or 6.9 kPa |
Maximum travel speed | 4 km/h and 3.8 km/h | 5 % more or 0.2 km/h |
Booms/sections features 1
Maximum excavation depth | 2642.6 mm and 2365 mm | 11 % more or 277.6 mm |
Maximum radius along ground level | 4700 mm and 4065 mm | 14 % more or 635 mm |
Maximum loading height | 2996.2 mm and 2510 mm | 16 % more or 486.2 mm |
Maximum vertical wall digging depth | 2033 mm and 1795 mm | 12 % more or 238 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 1745 mm and 786.4 mm |
Caterpillar track length on ground level | 1325 mm and 1929.4 mm |
Operation
Working weight | 2199.9 kg and 2940.2 kg |
Motor
Manufacturer | Mitsubishi and Isuzu |
Model | L3E-W231 and 3LD2 |
Carrier
Shoe dimensions | 230 mm and 300 mm |
Booms/sections features 1
Unit load-transfer length | 4075 mm and 4242.8 mm |
Maximum cut height | 3745 mm and 4242.8 mm |
Unit load-transfer height | 2250 mm and 2550 mm |
Images
Sizes
2. Width to outside of caterpillar track | 1380 mm | 2. Width to outside of caterpillar track | 1548.4 mm |
4. Caterpillar track length on ground level | 1325 mm | 4. Caterpillar track length on ground level | 1929.4 mm |
8. Rear platform swing radius | 1745 mm | 8. Rear platform swing radius | 786.4 mm |
Carrier
14. Shoe dimensions | 230 mm | 14. Shoe dimensions | 300 mm |
Booms/sections features 1
13. Maximum excavation depth | 2365 mm | 13. Maximum excavation depth | 2642.6 mm |
1. Unit load-transfer length | 4075 mm | 1. Unit load-transfer length | 4242.8 mm |
3. Unit load-transfer height | 2250 mm | 3. Unit load-transfer height | 2550 mm |
9. Maximum cut height | 3745 mm | 9. Maximum cut height | 4242.8 mm |
10. Maximum loading height | 2510 mm | 10. Maximum loading height | 2996.2 mm |
11. Maximum radius along ground level | 4065 mm | 11. Maximum radius along ground level | 4700 mm |
12. Maximum vertical wall digging depth | 1795 mm | 12. Maximum vertical wall digging depth | 2033 mm |