- Home/
- Comparison/
- Mini Digger/
- Hyundai R35Z-7 vs. Volvo EC15
Hyundai R35Z-7 vs. Volvo EC15
18 reasons to buy Hyundai R35Z-7:
Swing device
Rotation speed | 9.5 rev / min and 9 rev / min | 5 % more or 0.5 rev |
Sizes
Width to outside of caterpillar track | 1740 mm and 980 mm | 44 % more or 760 mm |
Clearance | 290 mm and 210 mm | 28 % more or 80 mm |
Counterweight ground clearance | 540 mm and 450 mm | 17 % more or 90 mm |
Operation
Cooling system fluid volume | 5 l. and 4.5 l. | 10 % more or 0.5 l. |
Hydraulic system fluid volume | 46 l. and 23 l. | 50 % more or 23 l. |
Engine oil volume | 6.7 l. and 3.6 l. | 46 % more or 3.1 l. |
Generator current strength | 55 amperes and 40 amperes | 27 % more or 15 amperes |
Hydraulic system overflow valve pressure | 22550 kPa and 16995.6 kPa | 25 % more or 5554.4 kPa |
Fuel Capacity | 42 l. and 21 l. | 50 % more or 21 l. |
Motor
Maximum torque | 105.8 Nm and 54 Nm | 49 % more or 51.8 Nm |
Full power | 20.4 kW and 14 kW | 31 % more or 6.4 kW |
Effective power | 19.8 kW and 11.3 kW | 43 % more or 8.5 kW |
Carrier
Maximum travel speed | 4.5 km/h and 2 km/h | 56 % more or 2.5 km/h |
Booms/sections features 1
Maximum excavation depth | 3150 mm and 2200 mm | 30 % more or 950 mm |
Maximum radius along ground level | 5240 mm and 1500 mm | 71 % more or 3740 mm |
Maximum loading height | 3450 mm and 2480 mm | 28 % more or 970 mm |
Maximum vertical wall digging depth | 2190 mm and 1500 mm | 32 % more or 690 mm |
3 reasons to buy Volvo EC15:
Operation
Hydraulic pump flow rate | 32 l/min and 77 l/min | 58 % less or 45 l/min |
Motor
Torque measured at | 1850 rev / min and 1200 rev / min | 35 % more or 650 rev |
Carrier
Specific ground pressure | 30.3 kPa and 33.3 kPa | 9 % less or 3.0 kPa |
Neutral reasons:
Sizes
Height to cab upper part | 2500 mm and 2250 mm |
Rear platform swing radius | 870 mm and 1160 mm |
Caterpillar track length on ground level | 1700 mm and 1045 mm |
Operation
Operating voltage | 12 V and 12 V |
Working weight | 3650 kg and 1565 kg |
Motor
Manufacturer | Yanmar and Mitsubishi |
Model | 3TNV88 and L3E |
Power measured at | 2200 rev / min and 2200 rev / min |
Carrier
Shoe dimensions | 300 mm and 230 mm |
Track width | 1440 mm and 760 mm |
Booms/sections features 1
Maximum cut height | 4830 mm and 3410 mm |
Unit load-transfer length | 4790 mm and 3650 mm |
Images
Sizes
2. Width to outside of caterpillar track | 1740 mm | 2. Width to outside of caterpillar track | 980 mm |
4. Caterpillar track length on ground level | 1700 mm | 4. Caterpillar track length on ground level | 1045 mm |
5. Clearance | 290 mm | 5. Clearance | 210 mm |
7. Height to cab upper part | 2500 mm | 7. Height to cab upper part | 2250 mm |
8. Rear platform swing radius | 870 mm | 8. Rear platform swing radius | 1160 mm |
15. Counterweight ground clearance | 540 mm | 15. Counterweight ground clearance | 450 mm |
Carrier
6. Track width | 1440 mm | 6. Track width | 760 mm |
14. Shoe dimensions | 300 mm | 14. Shoe dimensions | 230 mm |
Booms/sections features 1
12. Maximum vertical wall digging depth | 2190 mm | 12. Maximum vertical wall digging depth | 1740 mm |
13. Maximum excavation depth | 3150 mm | 13. Maximum excavation depth | 2450 mm |
1. Unit load-transfer length | 4790 mm | 1. Unit load-transfer length | 3650 mm |
9. Maximum cut height | 4830 mm | 9. Maximum cut height | 3410 mm |
10. Maximum loading height | 3450 mm | 10. Maximum loading height | 2480 mm |
11. Maximum radius along ground level | 5240 mm | 11. Maximum radius along ground level | 1500 mm |