vs.

      John Deere 35 ZTS vs. Komatsu PC18MR-3

      8 reasons to buy John Deere 35 ZTS:

      Sizes

      Width to outside of caterpillar track 1752.6 mm and 980 mm 44 % more or 772.6 mm

      Operation

      Fuel Capacity 39.7 l. and 19 l. 52 % more or 20.7 l.
      Hydraulic system fluid volume 29.9 l. and 15.2 l. 49 % more or 14.7 l.

      Carrier

      Maximum travel speed 4.5 km/h and 4.3 km/h 4 % more or 0.2 km/h

      Booms/sections features 1

      Maximum vertical wall digging depth 2362.2 mm and 1785 mm 24 % more or 577.2 mm
      Maximum excavation depth 3148.6 mm and 2160 mm 31 % more or 988.6 mm
      Maximum radius along ground level 5206 mm and 3935 mm 24 % more or 1271 mm
      Maximum loading height 3099.8 mm and 2610 mm 16 % more or 489.8 mm

      4 reasons to buy Komatsu PC18MR-3:

      Swing device

      Rotation speed 8.9 rev / min and 8.8 rev / min 1 % more or 0.1 rev

      Operation

      Generator current strength 40 amperes and 35 amperes 12 % more or 5 amperes
      Hydraulic pump flow rate 54.3 l/min and 83.3 l/min 35 % less or 29.0 l/min

      Motor

      Power measured at 2600 rev / min and 2450 rev / min 6 % more or 150 rev

      Neutral reasons:

      Sizes

      Height to cab upper part 2539 mm and 2410 mm
      Rear platform swing radius 862.6 mm and 715 mm

      Operation

      Working weight 3529.9 kg and 1855 kg
      Operating voltage 12 V and 12 V

      Motor

      Model 3LD1 and 3D67E-2
      Manufacturer Isuzu and Komatsu

      Booms/sections features 1

      Unit load-transfer height 2650 mm and 2410 mm
      Unit load-transfer length 4720 mm and 3650 mm
      Maximum cut height 4471.4 mm and 3615 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 1752.6 mm 2. Width to outside of caterpillar track 980 mm
      7. Height to cab upper part 2539 mm 7. Height to cab upper part 2410 mm
      8. Rear platform swing radius 862.6 mm 8. Rear platform swing radius 715 mm

      Booms/sections features 1

      1. Unit load-transfer length 4720 mm 1. Unit load-transfer length 3650 mm
      3. Unit load-transfer height 2650 mm 3. Unit load-transfer height 2410 mm
      9. Maximum cut height 4471.4 mm 9. Maximum cut height 3615 mm
      10. Maximum loading height 3099.8 mm 10. Maximum loading height 2610 mm
      11. Maximum radius along ground level 5206 mm 11. Maximum radius along ground level 3935 mm
      12. Maximum vertical wall digging depth 2362.2 mm 12. Maximum vertical wall digging depth 1785 mm
      13. Maximum excavation depth 3148.6 mm 13. Maximum excavation depth 2160 mm