- Home/
- Comparison/
- Mini Digger/
- Kobelco 17SR ACERA vs. John Deere 35 ZTS
Kobelco 17SR ACERA vs. John Deere 35 ZTS
3 reasons to buy Kobelco 17SR ACERA:
Operation
Generator current strength | 40 amperes and 35 amperes | 12 % more or 5 amperes |
Hydraulic pump flow rate | 32.6 l/min and 83.3 l/min | 61 % less or 50.7 l/min |
Carrier
Specific ground pressure | 27.6 kPa and 31.2 kPa | 12 % less or 3.6 kPa |
12 reasons to buy John Deere 35 ZTS:
Swing device
Rotation speed | 8.8 rev / min and 8.6 rev / min | 2 % more or 0.2 rev |
Sizes
Width to outside of caterpillar track | 1752.6 mm and 1320 mm | 25 % more or 432.6 mm |
Clearance | 359.7 mm and 180 mm | 50 % more or 179.7 mm |
Counterweight ground clearance | 557.8 mm and 450 mm | 19 % more or 107.8 mm |
Operation
Fuel Capacity | 39.7 l. and 22 l. | 45 % more or 17.7 l. |
Hydraulic system fluid volume | 29.9 l. and 15 l. | 50 % more or 14.9 l. |
Motor
Power measured at | 2450 rev / min and 2200 rev / min | 10 % more or 250 rev |
Carrier
Maximum travel speed | 4.5 km/h and 4 km/h | 11 % more or 0.5 km/h |
Booms/sections features 1
Maximum loading height | 3099.8 mm and 2650 mm | 15 % more or 449.8 mm |
Maximum vertical wall digging depth | 2362.2 mm and 1660 mm | 30 % more or 702.2 mm |
Maximum excavation depth | 3148.6 mm and 2150 mm | 32 % more or 998.6 mm |
Maximum radius along ground level | 5206 mm and 3790 mm | 27 % more or 1416 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2350 mm and 2539 mm |
Rear platform swing radius | 660 mm and 862.6 mm |
Caterpillar track length on ground level | 1210 mm and 2109.2 mm |
Operation
Working weight | 1650 kg and 3529.9 kg |
Operating voltage | 12 V and 12 V |
Motor
Manufacturer | Mitsubishi and Isuzu |
Model | L3E-W231KBS and 3LD1 |
Booms/sections features 1
Maximum cut height | 3680 mm and 4471.4 mm |
Unit load-transfer height | 2350 mm and 2650 mm |
Unit load-transfer length | 3420 mm and 4720 mm |
Images
Sizes
2. Width to outside of caterpillar track | 1320 mm | 2. Width to outside of caterpillar track | 1752.6 mm |
4. Caterpillar track length on ground level | 1210 mm | 4. Caterpillar track length on ground level | 2109.2 mm |
5. Clearance | 180 mm | 5. Clearance | 359.7 mm |
7. Height to cab upper part | 2350 mm | 7. Height to cab upper part | 2539 mm |
8. Rear platform swing radius | 660 mm | 8. Rear platform swing radius | 862.6 mm |
15. Counterweight ground clearance | 450 mm | 15. Counterweight ground clearance | 557.8 mm |
Booms/sections features 1
12. Maximum vertical wall digging depth | 1660 mm | 12. Maximum vertical wall digging depth | 2362.2 mm |
13. Maximum excavation depth | 2150 mm | 13. Maximum excavation depth | 3148.6 mm |
1. Unit load-transfer length | 3580 mm | 1. Unit load-transfer length | 4720 mm |
3. Unit load-transfer height | 2350 mm | 3. Unit load-transfer height | 2650 mm |
9. Maximum cut height | 3880 mm | 9. Maximum cut height | 4471.4 mm |
10. Maximum loading height | 2750 mm | 10. Maximum loading height | 3099.8 mm |
11. Maximum radius along ground level | 4020 mm | 11. Maximum radius along ground level | 5206 mm |