- Home/
- Comparison/
- Mini Digger/
- Komatsu PC27R-8 vs. Case CX36
Komatsu PC27R-8 vs. Case CX36
12 reasons to buy Komatsu PC27R-8:
Swing device
Rotation speed | 9 rev / min and 8.6 rev / min | 4 % more or 0.4 rev |
Sizes
Counterweight ground clearance | 585 mm and 570 mm | 3 % more or 15 mm |
Operation
Generator current strength | 40 amperes and 24 amperes | 40 % more or 16 amperes |
Hydraulic system overflow valve pressure | 21000 kPa and 156.9 kPa | 99 % more or 20843.1 kPa |
Fuel Capacity | 35 l. and 3.7 l. | 89 % more or 31.3 l. |
Cooling system fluid volume | 4 l. and 2.7 l. | 32 % more or 1.3 l. |
Engine oil volume | 5.2 l. and 3.7 l. | 29 % more or 1.5 l. |
Motor
Power measured at | 2600 rev / min and 2400 rev / min | 8 % more or 200 rev |
Torque measured at | 1600 rev / min and 1500 rev / min | 6 % more or 100 rev |
Maximum torque | 81.5 Nm and 79.5 Nm | 2 % more or 2.0 Nm |
Effective power | 19.4 kW and 17.7 kW | 9 % more or 1.7 kW |
Carrier
Specific ground pressure | 30.3 kPa and 31 kPa | 2 % less or 0.7 kPa |
8 reasons to buy Case CX36:
Sizes
Width to outside of caterpillar track | 1700 mm and 1500 mm | 12 % more or 200 mm |
Operation
Hydraulic pump flow rate | 69.6 l/min and 76.3 l/min | 9 % less or 6.7 l/min |
Hydraulic system fluid volume | 48 l. and 29 l. | 40 % more or 19 l. |
Carrier
Maximum travel speed | 4.5 km/h and 4.4 km/h | 2 % more or 0.1 km/h |
Booms/sections features 1
Maximum excavation depth | 3100 mm and 2650 mm | 15 % more or 450 mm |
Maximum radius along ground level | 5060 mm and 4700 mm | 7 % more or 360 mm |
Maximum loading height | 3220 mm and 3120 mm | 3 % more or 100 mm |
Maximum vertical wall digging depth | 2320 mm and 2185 mm | 6 % more or 135 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 1240 mm and 850 mm |
Caterpillar track length on ground level | 1485 mm and 1700 mm |
Height to cab upper part | 2490 mm and 2510 mm |
Operation
Operating voltage | 12 V and 12 V |
Working weight | 2970 kg and 3509.9 kg |
Motor
Displacement | 1.3 l. and 1.3 l. |
Manufacturer | Komatsu and Yanmar |
Cylinders number | 3 and 3 |
Model | 3D82AE-3FA and 3TNE82A |
Carrier
Rolling bearings number on either side | 4 and 4 |
Shoe dimensions | 300 mm and 299.7 mm |
Booms/sections features 1
Maximum cut height | 4400 mm and 4530 mm |
Unit load-transfer height | 2490 mm and 2510 mm |
Unit load-transfer length | 4525 mm and 4720 mm |
Images
Sizes
2. Width to outside of caterpillar track | 1500 mm | 2. Width to outside of caterpillar track | 1700 mm |
4. Caterpillar track length on ground level | 1485 mm | 4. Caterpillar track length on ground level | 1700 mm |
7. Height to cab upper part | 2490 mm | 7. Height to cab upper part | 2510 mm |
8. Rear platform swing radius | 1240 mm | 8. Rear platform swing radius | 850 mm |
15. Counterweight ground clearance | 585 mm | 15. Counterweight ground clearance | 570 mm |
Carrier
14. Shoe dimensions | 300 mm | 14. Shoe dimensions | 299.7 mm |
Booms/sections features 1
13. Maximum excavation depth | 2900 mm | 13. Maximum excavation depth | 3100 mm |
1. Unit load-transfer length | 4655 mm | 1. Unit load-transfer length | 4720 mm |
3. Unit load-transfer height | 2490 mm | 3. Unit load-transfer height | 2510 mm |
9. Maximum cut height | 4655 mm | 9. Maximum cut height | 4530 mm |
10. Maximum loading height | 3360 mm | 10. Maximum loading height | 3220 mm |
11. Maximum radius along ground level | 5090 mm | 11. Maximum radius along ground level | 5060 mm |
12. Maximum vertical wall digging depth | 2585 mm | 12. Maximum vertical wall digging depth | 2320 mm |