vs.

      Pel-Job EB450 vs. Case CX15B serie 2

      22 reasons to buy Pel-Job EB450:

      Sizes

      Width to outside of caterpillar track 1800 mm and 990 mm 45 % more or 810 mm
      Counterweight ground clearance 650 mm and 440 mm 32 % more or 210 mm

      Operation

      Hydraulic system overflow valve pressure 26000 kPa and 20600 kPa 21 % more or 5400 kPa
      Engine oil volume 7.7 l. and 3 l. 61 % more or 4.7 l.
      Fuel Capacity 66 l. and 19.5 l. 70 % more or 46.5 l.
      Cooling system fluid volume 8 l. and 3.5 l. 56 % more or 4.5 l.
      Hydraulic system fluid volume 62 l. and 12.3 l. 80 % more or 49.7 l.

      Motor

      Full power 31.3 kW and 11.2 kW 64 % more or 20.1 kW
      Power measured at 2600 rev / min and 2100 rev / min 19 % more or 500 rev
      Maximum torque 137 Nm and 53.5 Nm 61 % more or 83.5 Nm
      Cylinders number 4 and 3 25 % more or 1

      Carrier

      Rolling bearings number on either side 4 and 3 25 % more or 1
      Specific ground pressure 25.4 kPa and 30 kPa 15 % less or 4.6 kPa
      Maximum travel speed 4.3 km/h and 3.5 km/h 19 % more or 0.8 km/h

      Booms/sections features 2

      Maximum excavation depth 3620 mm and 2400 mm 34 % more or 1220 mm
      Maximum radius along ground level 5570 mm and 3900 mm 30 % more or 1670 mm
      Maximum loading height 3810 mm and 2595 mm 32 % more or 1215 mm
      Maximum vertical wall digging depth 2550 mm and 2260 mm 11 % more or 290 mm

      Booms/sections features 1

      Maximum excavation depth 3320 mm and 2200 mm 34 % more or 1120 mm
      Maximum radius along ground level 5280 mm and 3705 mm 30 % more or 1575 mm
      Maximum loading height 3640 mm and 2470 mm 32 % more or 1170 mm
      Maximum vertical wall digging depth 2310 mm and 2060 mm 11 % more or 250 mm

      2 reasons to buy Case CX15B serie 2:

      Operation

      Hydraulic pump flow rate 15.5 l/min and 99 l/min 84 % less or 83.5 l/min

      Motor

      Torque measured at 1800 rev / min and 1400 rev / min 22 % more or 400 rev

      Neutral reasons:

      Sizes

      Height to cab upper part 2510 mm and 2350 mm
      Rear platform swing radius 1360 mm and 1060 mm
      Caterpillar track length on ground level 1770 mm and 1210 mm

      Operation

      Operating voltage 12 V and 12 V
      Generator current strength 40 amperes and 40 amperes
      Working weight 4387 kg and 1700 kg

      Motor

      Manufacturer Mitsubishi and Mitsubishi
      Model K4N and L3E

      Carrier

      Shoe dimensions 400 mm and 230 mm

      Booms/sections features 2

      Unit load-transfer length 4930 mm and 3620 mm
      Maximum cut height 5110 mm and 3675 mm
      Unit load-transfer height 2510 mm and 2350 mm

      Booms/sections features 1

      Maximum cut height 4930 mm and 3550 mm
      Unit load-transfer height 2510 mm and 2350 mm
      Unit load-transfer length 4930 mm and 3600 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 1800 mm 2. Width to outside of caterpillar track 990 mm
      15. Counterweight ground clearance 650 mm 15. Counterweight ground clearance 440 mm
      4. Caterpillar track length on ground level 1770 mm 4. Caterpillar track length on ground level 1210 mm
      7. Height to cab upper part 2510 mm 7. Height to cab upper part 2350 mm
      8. Rear platform swing radius 1360 mm 8. Rear platform swing radius 1060 mm

      Carrier

      14. Shoe dimensions 400 mm 14. Shoe dimensions 230 mm

      Booms/sections features 1

      3. Unit load-transfer height 2510 mm 3. Unit load-transfer height 2350 mm
      9. Maximum cut height 4930 mm 9. Maximum cut height 3675 mm
      1. Unit load-transfer length 4930 mm 1. Unit load-transfer length 3620 mm
      10. Maximum loading height 3640 mm 10. Maximum loading height 2595 mm
      11. Maximum radius along ground level 5280 mm 11. Maximum radius along ground level 3900 mm
      12. Maximum vertical wall digging depth 2310 mm 12. Maximum vertical wall digging depth 2260 mm
      13. Maximum excavation depth 3320 mm 13. Maximum excavation depth 2400 mm