- Home/
- Comparison/
- Mini Digger/
- Pel-Job EB450 vs. Hitachi EX15-2
Pel-Job EB450 vs. Hitachi EX15-2
22 reasons to buy Pel-Job EB450:
Swing device
Rotation speed | 10 rev / min and 9 rev / min | 10 % more or 1 rev |
Sizes
Width to outside of caterpillar track | 1800 mm and 1000 mm | 44 % more or 800 mm |
Clearance | 320 mm and 235 mm | 27 % more or 85 mm |
Counterweight ground clearance | 650 mm and 445 mm | 32 % more or 205 mm |
Operation
Fuel Capacity | 66 l. and 20 l. | 70 % more or 46 l. |
Cooling system fluid volume | 8 l. and 3.5 l. | 56 % more or 4.5 l. |
Hydraulic system fluid volume | 62 l. and 30 l. | 52 % more or 32 l. |
Engine oil volume | 7.7 l. and 4.5 l. | 42 % more or 3.2 l. |
Generator current strength | 40 amperes and 36 amperes | 10 % more or 4 amperes |
Hydraulic system overflow valve pressure | 26000 kPa and 21084.3 kPa | 19 % more or 4915.7 kPa |
Motor
Displacement | 2.3 l. and 1.1 l. | 52 % more or 1.2 l. |
Maximum torque | 137 Nm and 63.7 Nm | 54 % more or 73.3 Nm |
Cylinders number | 4 and 3 | 25 % more or 1 |
Effective power | 27.6 kW and 12.9 kW | 53 % more or 14.7 kW |
Power measured at | 2600 rev / min and 2100 rev / min | 19 % more or 500 rev |
Carrier
Rolling bearings number on either side | 4 and 3 | 25 % more or 1 |
Specific ground pressure | 25.4 kPa and 27.8 kPa | 9 % less or 2.4 kPa |
Maximum travel speed | 4.3 km/h and 2.3 km/h | 47 % more or 2.0 km/h |
Booms/sections features 1
Maximum excavation depth | 3320 mm and 2170 mm | 35 % more or 1150 mm |
Maximum radius along ground level | 5280 mm and 3680 mm | 30 % more or 1600 mm |
Maximum loading height | 3640 mm and 2330 mm | 36 % more or 1310 mm |
Maximum vertical wall digging depth | 2310 mm and 1620 mm | 30 % more or 690 mm |
2 reasons to buy Hitachi EX15-2:
Operation
Hydraulic pump flow rate | 32 l/min and 99 l/min | 68 % less or 67 l/min |
Motor
Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
Neutral reasons:
Sizes
Height to cab upper part | 2510 mm and 2280 mm |
Rear platform swing radius | 1360 mm and 1060 mm |
Caterpillar track length on ground level | 1770 mm and 1025 mm |
Operation
Working weight | 4387 kg and 1450 kg |
Operating voltage | 12 V and 12 V |
Motor
Model | K4N and D1105-KA |
Manufacturer | Mitsubishi and Kubota |
Carrier
Shoe dimensions | 400 mm and 230 mm |
Booms/sections features 1
Unit load-transfer height | 2510 mm and 2280 mm |
Unit load-transfer length | 4930 mm and 3630 mm |
Maximum cut height | 4930 mm and 3260 mm |
Images
Sizes
2. Width to outside of caterpillar track | 1800 mm | 2. Width to outside of caterpillar track | 1000 mm |
4. Caterpillar track length on ground level | 1770 mm | 4. Caterpillar track length on ground level | 1025 mm |
5. Clearance | 320 mm | 5. Clearance | 235 mm |
7. Height to cab upper part | 2510 mm | 7. Height to cab upper part | 2280 mm |
8. Rear platform swing radius | 1360 mm | 8. Rear platform swing radius | 1060 mm |
15. Counterweight ground clearance | 650 mm | 15. Counterweight ground clearance | 445 mm |
Carrier
14. Shoe dimensions | 400 mm | 14. Shoe dimensions | 230 mm |
Booms/sections features 1
9. Maximum cut height | 5110 mm | 9. Maximum cut height | 3260 mm |
10. Maximum loading height | 3810 mm | 10. Maximum loading height | 2330 mm |
11. Maximum radius along ground level | 5570 mm | 11. Maximum radius along ground level | 3680 mm |
12. Maximum vertical wall digging depth | 2550 mm | 12. Maximum vertical wall digging depth | 1620 mm |
13. Maximum excavation depth | 3620 mm | 13. Maximum excavation depth | 2170 mm |
1. Unit load-transfer length | 4930 mm | 1. Unit load-transfer length | 3630 mm |
3. Unit load-transfer height | 2510 mm | 3. Unit load-transfer height | 2280 mm |