vs.

      Takeuchi TB014 vs. Case CX36

      9 reasons to buy Takeuchi TB014:

      Swing device

      Rotation speed 9 rev / min and 8.6 rev / min 4 % more or 0.4 rev

      Sizes

      Width to outside of caterpillar track 3709.4 mm and 1700 mm 54 % more or 2009.4 mm

      Operation

      Engine oil volume 11.4 l. and 3.7 l. 68 % more or 7.7 l.
      Hydraulic system overflow valve pressure 18140.1 kPa and 156.9 kPa 99 % more or 17983.2 kPa
      Hydraulic pump flow rate 42.9 l/min and 69.6 l/min 38 % less or 26.7 l/min
      Fuel Capacity 23.1 l. and 3.7 l. 84 % more or 19.4 l.
      Cooling system fluid volume 12.5 l. and 2.7 l. 78 % more or 9.8 l.

      Motor

      Torque measured at 1700 rev / min and 1500 rev / min 12 % more or 200 rev

      Carrier

      Specific ground pressure 28.6 kPa and 31 kPa 8 % less or 2.4 kPa

      11 reasons to buy Case CX36:

      Sizes

      Clearance 320 mm and 221 mm 31 % more or 99 mm

      Operation

      Generator current strength 24 amperes and 20 amperes 17 % more or 4 amperes
      Hydraulic system fluid volume 48 l. and 32.9 l. 31 % more or 15.1 l.

      Motor

      Power measured at 2400 rev / min and 2100 rev / min 12 % more or 300 rev
      Maximum torque 79.5 Nm and 51 Nm 36 % more or 28.5 Nm

      Carrier

      Rolling bearings number on either side 4 and 3 25 % more or 1
      Maximum travel speed 4.5 km/h and 2.3 km/h 49 % more or 2.2 km/h

      Booms/sections features 1

      Maximum radius along ground level 5060 mm and 3758.2 mm 26 % more or 1301.8 mm
      Maximum loading height 3220 mm and 2667 mm 17 % more or 553 mm
      Maximum vertical wall digging depth 2320 mm and 1700.8 mm 27 % more or 619.2 mm
      Maximum excavation depth 3100 mm and 2133.6 mm 31 % more or 966.4 mm

      Neutral reasons:

      Sizes

      Height to cab upper part 2286 mm and 2510 mm
      Rear platform swing radius 1087.1 mm and 850 mm
      Caterpillar track length on ground level 1016 mm and 1700 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 1455.1 kg and 3509.9 kg

      Motor

      Manufacturer Yanmar and Yanmar
      Model 3TNE-68 and 3TNE82A
      Cylinders number 3 and 3

      Carrier

      Shoe dimensions 228.6 mm and 299.7 mm

      Booms/sections features 1

      Maximum cut height 3709.4 mm and 4530 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 3709.4 mm 2. Width to outside of caterpillar track 1700 mm
      4. Caterpillar track length on ground level 1016 mm 4. Caterpillar track length on ground level 1700 mm
      5. Clearance 221 mm 5. Clearance 320 mm
      7. Height to cab upper part 2286 mm 7. Height to cab upper part 2510 mm
      8. Rear platform swing radius 1087.1 mm 8. Rear platform swing radius 850 mm

      Carrier

      14. Shoe dimensions 228.6 mm 14. Shoe dimensions 299.7 mm

      Booms/sections features 1

      9. Maximum cut height 3709.4 mm 9. Maximum cut height 4530 mm
      10. Maximum loading height 2667 mm 10. Maximum loading height 3220 mm
      11. Maximum radius along ground level 3758.2 mm 11. Maximum radius along ground level 5060 mm
      12. Maximum vertical wall digging depth 1700.8 mm 12. Maximum vertical wall digging depth 2320 mm
      13. Maximum excavation depth 2133.6 mm 13. Maximum excavation depth 3100 mm