vs.

      Terex HR1.6 vs. Komatsu PC30R-8

      3 reasons to buy Terex HR1.6:

      Swing device

      Rotation speed 10 rev / min and 9 rev / min 10 % more or 1 rev

      Operation

      Hydraulic system fluid volume 37 l. and 33 l. 11 % more or 4 l.
      Hydraulic pump flow rate 53 l/min and 85 l/min 38 % less or 32 l/min

      15 reasons to buy Komatsu PC30R-8:

      Sizes

      Width to outside of caterpillar track 1520 mm and 1100 mm 28 % more or 420 mm
      Clearance 300 mm and 170 mm 43 % more or 130 mm

      Operation

      Fuel Capacity 50 l. and 31 l. 38 % more or 19 l.
      Hydraulic system overflow valve pressure 24545.3 kPa and 16512.9 kPa 33 % more or 8032.4 kPa

      Motor

      Full power 20.6 kW and 13.4 kW 35 % more or 7.2 kW
      Power measured at 2700 rev / min and 2400 rev / min 11 % more or 300 rev

      Carrier

      Maximum travel speed 4.6 km/h and 3 km/h 35 % more or 1.6 km/h

      Booms/sections features 2

      Maximum vertical wall digging depth 2575 mm and 1200 mm 53 % more or 1375 mm
      Maximum excavation depth 3230 mm and 2400 mm 26 % more or 830 mm
      Maximum radius along ground level 5235 mm and 4100 mm 22 % more or 1135 mm
      Maximum loading height 3655 mm and 2400 mm 34 % more or 1255 mm

      Booms/sections features 1

      Maximum vertical wall digging depth 2175 mm and 1100 mm 49 % more or 1075 mm
      Maximum excavation depth 2900 mm and 2200 mm 24 % more or 700 mm
      Maximum radius along ground level 4850 mm and 3900 mm 20 % more or 950 mm
      Maximum loading height 3415 mm and 2300 mm 33 % more or 1115 mm

      Neutral reasons:

      Sizes

      Rear platform swing radius 1100 mm and 1390 mm

      Operation

      Working weight 1660 kg and 3190 kg

      Motor

      Manufacturer Mitsubishi and Komatsu
      Model L3E-W 262 KL and 3D84E

      Booms/sections features 2

      Maximum cut height 3500 mm and 5140 mm

      Booms/sections features 1

      Maximum cut height 3400 mm and 4900 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 1100 mm 2. Width to outside of caterpillar track 1520 mm
      5. Clearance 170 mm 5. Clearance 300 mm
      8. Rear platform swing radius 1100 mm 8. Rear platform swing radius 1390 mm

      Booms/sections features 1

      13. Maximum excavation depth 2200 mm 13. Maximum excavation depth 3230 mm
      9. Maximum cut height 3500 mm 9. Maximum cut height 5140 mm
      10. Maximum loading height 2400 mm 10. Maximum loading height 3655 mm
      11. Maximum radius along ground level 4100 mm 11. Maximum radius along ground level 5235 mm
      12. Maximum vertical wall digging depth 1200 mm 12. Maximum vertical wall digging depth 2575 mm