- Home/
- Comparison/
- Wheeled Excavator/
- Airman EW180B vs. Liebherr A900CUS
Airman EW180B vs. Liebherr A900CUS
8 reasons to buy Airman EW180B:
Swing device
Rotation speed | 9.5 rev / min and 9 rev / min | 5 % more or 0.5 rev |
Operation
Generator current strength | 80 amperes and 55 amperes | 31 % more or 25 amperes |
Fuel Capacity | 300 l. and 299 l. | 0 % more or 1 l. |
Motor
Full power | 88.7 kW and 88 kW | 1 % more or 0.7 kW |
Gear box
Maximum travel speed | 35 km/h and 28 km/h | 20 % more or 7 km/h |
Boom/section options 1
Maximum excavation depth | 5700 mm and 5309.6 mm | 7 % more or 390.4 mm |
Maximum radius along ground level | 9000 mm and 8787.4 mm | 2 % more or 212.6 mm |
Maximum vertical wall digging depth | 4200 mm and 3810 mm | 9 % more or 390 mm |
4 reasons to buy Liebherr A900CUS:
Sizes
Clearance | 381 mm and 370 mm | 3 % more or 11 mm |
Operation
Hydraulic system fluid volume | 321.8 l. and 320 l. | 1 % more or 1.8 l. |
Hydraulic pump flow rate | 268.8 l/min and 355 l/min | 24 % less or 86.2 l/min |
Motor
Displacement | 6.6 l. and 5.7 l. | 14 % more or 0.9 l. |
Neutral reasons:
Sizes
Wheelbase | 2600 mm and 2539 mm |
Overall width | 2550 mm and 2490.2 mm |
Overall width with lowered supports | 3960 mm and 3682 mm |
Operation
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Volvo and Liebherr |
Model | D6D EFE2 and D924 TI-E |
Aspiration | turbocharging and Direct injection with turbocharging and charge air cooling, a reduced amount of emissions |
Gear box
Transmission type | powershift transmission and oversized 2-speed gearbox with shift under full load with an extra low gear |
Boom/section options 1
Maximum cut height | 9100 mm and 10058.4 mm |
Images
Sizes
2. Overall width | 2550 mm | 2. Overall width | 2490.2 mm |
4. Wheelbase | 2600 mm | 4. Wheelbase | 2539 mm |
5. Clearance | 370 mm | 5. Clearance | 381 mm |
6. Overall width with lowered supports | 3960 mm | 6. Overall width with lowered supports | 3682 mm |
Boom/section options 1
12. Maximum vertical wall digging depth | 4200 mm | 12. Maximum vertical wall digging depth | 3962.4 mm |
13. Maximum excavation depth | 5700 mm | 13. Maximum excavation depth | 5510.8 mm |
9. Maximum cut height | 9100 mm | 9. Maximum cut height | 10058.4 mm |
11. Maximum radius along ground level | 9000 mm | 11. Maximum radius along ground level | 8787.4 mm |