vs.

      Case WX125 vs. Liebherr A904C

      5 reasons to buy Case WX125:

      Swing device

      Swing torque 26000 Nm and 46 Nm 100 % more or 25954 Nm

      Sizes

      Clearance 360 mm and 350 mm 3 % more or 10 mm

      Operation

      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes
      Hydraulic pump flow rate 151 l/min and 330 l/min 54 % less or 179 l/min

      Gear box

      Maximum travel speed 33 km/h and 20 km/h 39 % more or 13 km/h

      14 reasons to buy Liebherr A904C:

      Swing device

      Rotation speed 9 rev / min and 8.3 rev / min 8 % more or 0.7 rev

      Sizes

      Upper structure clearance 1235 mm and 1155 mm 6 % more or 80 mm

      Operation

      Fuel Capacity 340 l. and 162 l. 52 % more or 178 l.
      Hydraulic system fluid volume 330 l. and 110 l. 67 % more or 220 l.

      Motor

      Effective power 100.7 kW and 87.2 kW 13 % more or 13.5 kW
      Displacement 6.6 l. and 3.9 l. 41 % more or 2.7 l.

      Boom/section options 2

      Maximum loading height 7062.2 mm and 6510 mm 8 % more or 552.2 mm
      Maximum vertical wall digging depth 4419.6 mm and 2841 mm 36 % more or 1578.6 mm
      Maximum excavation depth 6044.2 mm and 4838 mm 20 % more or 1206.2 mm
      Maximum radius along ground level 9296.4 mm and 8824 mm 5 % more or 472.4 mm

      Boom/section options 1

      Maximum excavation depth 5850 mm and 4491 mm 23 % more or 1359 mm
      Maximum radius along ground level 9092.2 mm and 8474 mm 7 % more or 618.2 mm
      Maximum loading height 6858 mm and 6201 mm 10 % more or 657 mm
      Maximum vertical wall digging depth 4267.2 mm and 2570 mm 40 % more or 1697.2 mm

      Neutral reasons:

      Sizes

      Rear platform swing radius 1670 mm and 2485 mm
      Overall width 2480 mm and 2480 mm
      Height to cab upper part 3085 mm and 3160 mm
      Wheelbase 2400 mm and 2750 mm

      Operation

      Hydraulic system overflow valve pressure 35000 kPa and 35000 kPa
      Working weight 12050 kg and 23500 kg
      Tyre size 600/40-22.5 and 10.00-20
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 4 and 4
      Aspiration turbocharging and Direct injection with turbocharging and charge air cooling, a reduced amount of emissions
      Manufacturer Case and Liebherr
      Model 439TA-M2 and D 924 TI-E
      Power measured at 2000 rev / min and 2000 rev / min

      Gear box

      Transmission type Hydro-Static Transmission and oversized 2-speed gearbox with shift under full load with an extra low gear
      Forward gears number 2 and 2
      Reverse gears number 2 and 2

      Boom/section options 2

      Option - Boom/Section (MEX) 2 excavator bucket 2350mm and Hydraulic adjustable boom 3800mm Section 2450mm
      Unit load-transfer height 3085 mm and 3148.6 mm
      Unit load-transfer length 8095 mm and 9043.4 mm
      Maximum cut height 9080 mm and 10082.8 mm

      Boom/section options 1

      Unit load-transfer length 7730 mm and 9043.4 mm
      Option - Boom/Section (MEX) 1 excavator bucket 20000mm and Hydraulic adjustable boom 3800mm Section 2250mm
      Maximum cut height 8759 mm and 9957.8 mm
      Unit load-transfer height 3085 mm and 3148.6 mm

      Images

      Sizes

      2. Overall width 2480 mm 2. Overall width 2480 mm
      4. Wheelbase 2400 mm 4. Wheelbase 2750 mm
      5. Clearance 360 mm 5. Clearance 350 mm
      7. Height to cab upper part 3085 mm 7. Height to cab upper part 3160 mm
      8. Rear platform swing radius 1670 mm 8. Rear platform swing radius 2485 mm
      14. Upper structure clearance 1155 mm 14. Upper structure clearance 1235 mm

      Boom/section options 1

      10. Maximum loading height 6201 mm 10. Maximum loading height 7138.4 mm
      11. Maximum radius along ground level 8474 mm 11. Maximum radius along ground level 9500.6 mm
      12. Maximum vertical wall digging depth 2570 mm 12. Maximum vertical wall digging depth 4572 mm
      13. Maximum excavation depth 4491 mm 13. Maximum excavation depth 6248.4 mm
      1. Unit load-transfer length 8095 mm 1. Unit load-transfer length 9000 mm
      3. Unit load-transfer height 3085 mm 3. Unit load-transfer height 3148.6 mm
      9. Maximum cut height 9080 mm 9. Maximum cut height 10210.8 mm