vs.

      Caterpillar M315C vs. John Deere 190DW

      9 reasons to buy Caterpillar M315C:

      Sizes

      Clearance 370 mm and 350 mm 5 % more or 20 mm

      Operation

      Cooling system fluid volume 39 l. and 22 l. 44 % more or 17 l.
      Front differential fluid volume 10.5 l. and 9.5 l. 10 % more or 1.0 l.
      Generator current strength 75 amperes and 50 amperes 33 % more or 25 amperes
      Hydraulic pump flow rate 80 l/min and 378 l/min 79 % less or 298 l/min

      Boom/section options 2

      Maximum loading height 7300 mm and 6950 mm 5 % more or 350 mm
      Maximum excavation depth 6090 mm and 5930 mm 3 % more or 160 mm
      Maximum radius along ground level 9380 mm and 9300 mm 1 % more or 80 mm

      Boom/section options 1

      Maximum loading height 6950 mm and 6450 mm 7 % more or 500 mm

      12 reasons to buy John Deere 190DW:

      Swing device

      Rotation speed 12.2 rev / min and 10.5 rev / min 14 % more or 1.7 rev
      Swing torque 40403.4 Nm and 40100 Nm 1 % more or 303.4 Nm

      Operation

      Fuel Capacity 290 l. and 235 l. 19 % more or 55 l.
      Engine oil volume 23 l. and 9 l. 61 % more or 14 l.
      Hydraulic system fluid volume 240 l. and 230 l. 4 % more or 10 l.

      Motor

      Effective power 118.6 kW and 92.5 kW 22 % more or 26.1 kW
      Displacement 5.2 l. and 4.4 l. 15 % more or 0.8 l.

      Gear box

      Maximum travel speed 35 km/h and 34 km/h 3 % more or 1 km/h

      Boom/section options 2

      Maximum vertical wall digging depth 5260 mm and 4090 mm 22 % more or 1170 mm

      Boom/section options 1

      Maximum vertical wall digging depth 5260 mm and 3720 mm 29 % more or 1540 mm
      Maximum excavation depth 5830 mm and 5590 mm 4 % more or 240 mm
      Maximum radius along ground level 9400 mm and 8910 mm 5 % more or 490 mm

      Neutral reasons:

      Sizes

      Rear platform swing radius 2197 mm and 2320 mm
      Overall width 2550 mm and 2540 mm
      Overall width with lowered supports 3665 mm and 3440 mm
      Height to cab upper part 3150 mm and 3130 mm
      Wheelbase 2500 mm and 2650 mm

      Operation

      Oscillatory axle angle 18 degrees and 7 degrees
      Working weight 16650 kg and 19971 kg
      Tyre size 10.00-20 16PR and 10.00-20, 16 PR
      Rear differential fluid volume 14 l. and 14 l.
      Operating voltage 12 V and 24 V

      Motor

      Manufacturer Caterpillar and Isuzu
      Model 3054E and 4HK1X, III Level III certified
      Power measured at 2000 rev / min and 2000 rev / min
      Cylinders number 4 and 4
      Aspiration turbocharging and Turbocharging with intercooler

      Gear box

      Transmission type powershift and automatic transmission system with power gear shifting
      Forward gears number 2 and 2
      Reverse gears number 2 and 2

      Boom/section options 2

      Option - Boom/Section (MEX) 2 VA Boom 5200mm / Section 2600mm and two-piece boom / Section 8'11" (2710mm)
      Unit load-transfer height 3150 mm and 3210 mm
      Unit load-transfer length 8470 mm and 8800 mm
      Maximum cut height 10380 mm and 9850 mm

      Boom/section options 1

      Maximum cut height 10040 mm and 9250 mm
      Option - Boom/Section (MEX) 1 VA Boom 5200mm / Section 2100mm and one-piece boom 18' (5500mm) / Section 8'11"(2710mm)
      Unit load-transfer height 3980 mm and 3130 mm
      Unit load-transfer length 8480 mm and 8980 mm

      Images

      Sizes

      2. Overall width 2550 mm 2. Overall width 2540 mm
      4. Wheelbase 2500 mm 4. Wheelbase 2650 mm
      5. Clearance 370 mm 5. Clearance 350 mm
      6. Overall width with lowered supports 3665 mm 6. Overall width with lowered supports 3440 mm
      7. Height to cab upper part 3150 mm 7. Height to cab upper part 3130 mm
      8. Rear platform swing radius 2197 mm 8. Rear platform swing radius 2320 mm

      Boom/section options 1

      13. Maximum excavation depth 6090 mm 13. Maximum excavation depth 5930 mm
      1. Unit load-transfer length 8320 mm 1. Unit load-transfer length 8800 mm
      3. Unit load-transfer height 3980 mm 3. Unit load-transfer height 3210 mm
      9. Maximum cut height 8980 mm 9. Maximum cut height 9850 mm
      10. Maximum loading height 6000 mm 10. Maximum loading height 6950 mm
      11. Maximum radius along ground level 8710 mm 11. Maximum radius along ground level 9300 mm
      12. Maximum vertical wall digging depth 3510 mm 12. Maximum vertical wall digging depth 5260 mm