vs.

      Doosan DX190W vs. Liebherr A900CUS

      15 reasons to buy Doosan DX190W:

      Swing device

      Rotation speed 10.9 rev / min and 9 rev / min 17 % more or 1.9 rev

      Sizes

      Upper structure clearance 1249 mm and 1243.6 mm 0 % more or 5.4 mm

      Operation

      Generator current strength 60 amperes and 55 amperes 8 % more or 5 amperes
      Hydraulic system overflow valve pressure 32400 kPa and 243 kPa 99 % more or 32157 kPa
      Fuel Capacity 310 l. and 299 l. 4 % more or 11 l.

      Motor

      Power measured at 1900 rev / min and 1800 rev / min 5 % more or 100 rev
      Cylinders number 6 and 4 33 % more or 2

      Gear box

      Forward gears number 3 and 2 33 % more or 1
      Reverse gears number 3 and 2 33 % more or 1
      Maximum travel speed 36 km/h and 28 km/h 22 % more or 8 km/h

      Boom/section options 4

      Maximum loading height 7415 mm and 7391.4 mm 0 % more or 23.6 mm
      Maximum excavation depth 5600 mm and 5510.8 mm 2 % more or 89.2 mm

      Boom/section options 3

      Maximum excavation depth 6465 mm and 5690.6 mm 12 % more or 774.4 mm

      Boom/section options 2

      Maximum excavation depth 5965 mm and 5510.8 mm 8 % more or 454.2 mm

      Boom/section options 1

      Maximum excavation depth 5565 mm and 5309.6 mm 5 % more or 255.4 mm

      7 reasons to buy Liebherr A900CUS:

      Sizes

      Clearance 381 mm and 350 mm 8 % more or 31 mm

      Operation

      Hydraulic pump flow rate 268.8 l/min and 400 l/min 33 % less or 131.2 l/min
      Hydraulic system fluid volume 321.8 l. and 205 l. 36 % more or 116.8 l.

      Motor

      Displacement 6.6 l. and 5.9 l. 11 % more or 0.7 l.

      Boom/section options 3

      Maximum loading height 7543.8 mm and 6645 mm 12 % more or 898.8 mm

      Boom/section options 2

      Maximum loading height 7339.6 mm and 6650 mm 9 % more or 689.6 mm

      Boom/section options 1

      Maximum loading height 7187.2 mm and 6420 mm 11 % more or 767.2 mm

      Neutral reasons:

      Sizes

      Overall width 2496 mm and 2490.2 mm
      Wheelbase 2700 mm and 2539 mm

      Operation

      Tyre size 10.0-20-14PR and 10.00-20
      Operating voltage 24 V and 24 V

      Motor

      Aspiration Turbocharged engine with intermediate cooling of charging air by oncoming air flow and Direct injection with turbocharging and charge air cooling, a reduced amount of emissions
      Manufacturer Doosan and Liebherr
      Model DL06 and D924 TI-E

      Gear box

      Transmission type hydrostatic powershift transmission and oversized 2-speed gearbox with shift under full load with an extra low gear

      Boom/section options 4

      Option - Boom/Section (MEX) 4 Boom 17'7" (5360mm)/Section 7'7" (2300mm) and 11.83 boom / 7.42 ft. Section
      Unit load-transfer height 3140 mm and 3148.6 mm
      Unit load-transfer length 8860 mm and 8558.8 mm
      Maximum cut height 10260 mm and 10210.8 mm

      Boom/section options 3

      Unit load-transfer length 8507 mm and 8558.8 mm
      Maximum cut height 9270 mm and 10338.8 mm
      Option - Boom/Section (MEX) 3 Boom 17'1" (5200mm)/Section 10'2" (3100mm) and 11.17 boom / 8.67 ft. Section
      Unit load-transfer height 3772 mm and 3148.6 mm

      Boom/section options 2

      Option - Boom/Section (MEX) 2 Boom 17'1" (5200mm)/Section 8'6" (2600mm) and 11.17 boom / 8 ft. Section
      Unit load-transfer height 3310 mm and 3148.6 mm
      Unit load-transfer length 8659 mm and 8558.8 mm
      Maximum cut height 9340 mm and 10210.8 mm

      Boom/section options 1

      Maximum cut height 9115 mm and 10058.4 mm
      Option - Boom/Section (MEX) 1 Boom 17'1" (5200mm)/Section 7'3" (2200mm) and 11.17 ft. boom / 7.42 ft. Section
      Unit load-transfer height 3212 mm and 3148.6 mm
      Unit load-transfer length 8715 mm and 8558.8 mm

      Images

      Sizes

      14. Upper structure clearance 1249 mm 14. Upper structure clearance 1243.6 mm
      2. Overall width 2496 mm 2. Overall width 2490.2 mm
      4. Wheelbase 2700 mm 4. Wheelbase 2539 mm
      5. Clearance 350 mm 5. Clearance 381 mm

      Boom/section options 1

      3. Unit load-transfer height 3772 mm 3. Unit load-transfer height 3148.6 mm
      9. Maximum cut height 9270 mm 9. Maximum cut height 10338.8 mm
      10. Maximum loading height 6645 mm 10. Maximum loading height 7391.4 mm
      13. Maximum excavation depth 6465 mm 13. Maximum excavation depth 5510.8 mm
      1. Unit load-transfer length 8860 mm 1. Unit load-transfer length 8558.8 mm