- Home/
- Comparison/
- Wheeled Excavator/
- Hyundai R55W-7 vs. Terex HML42
Hyundai R55W-7 vs. Terex HML42
3 reasons to buy Hyundai R55W-7:
Operation
Hydraulic pump flow rate | 120 l/min and 200.2 l/min | 40 % less or 80.2 l/min |
Motor
Power measured at | 2400 rev / min and 2000 rev / min | 17 % more or 400 rev |
Gear box
Maximum travel speed | 27 km/h and 20 km/h | 26 % more or 7 km/h |
10 reasons to buy Terex HML42:
Swing device
Rotation speed | 10 rev / min and 9.9 rev / min | 1 % more or 0.1 rev |
Sizes
Clearance | 440 mm and 290 mm | 34 % more or 150 mm |
Operation
Fuel Capacity | 240 l. and 120 l. | 50 % more or 120 l. |
Hydraulic system fluid volume | 190 l. and 70 l. | 63 % more or 120 l. |
Hydraulic system overflow valve pressure | 27992.7 kPa and 21580.6 kPa | 23 % more or 6412.1 kPa |
Motor
Displacement | 4 l. and 3 l. | 25 % more or 1 l. |
Effective power | 67.9 kW and 41 kW | 40 % more or 26.9 kW |
Boom/section options 1
Maximum excavation depth | 4315 mm and 3500 mm | 19 % more or 815 mm |
Maximum radius along ground level | 8300 mm and 6150 mm | 26 % more or 2150 mm |
Maximum loading height | 6040 mm and 4340 mm | 28 % more or 1700 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2850 mm and 3000 mm |
Overall width | 1925 mm and 2500 mm |
Wheelbase | 2100 mm and 2600 mm |
Rear platform swing radius | 1650 mm and 1600 mm |
Operation
Tyre size | 12.0x16.5-12PR and 9-20 |
Working weight | 5450 kg and 10990 kg |
Operating voltage | 12 V and 12 V |
Type of hydraulic pump | two variable displacement piston pumps and load-sensing axial piston pump |
Motor
Manufacturer | Yanmar and Deutz |
Cylinders number | 4 and 4 |
Model | 4TNV94L and BF4 M 2012 |
Gear box
Transmission type | 4-wheel hydrostatic drive, mesh, transmission with helical gearing and hydrostatic |
Forward gears number | 2 and 2 |
Reverse gears number | 2 and 2 |
Boom/section options 1
Option - Boom/Section (MEX) 1 | Boom 9'10" (3000mm)/Section 5'3" (1600mm) and two-piece articulated boom with dipper 2000mm |
Maximum cut height | 6070 mm and 8240 mm |
Images
Sizes
5. Clearance | 290 mm | 5. Clearance | 440 mm |
7. Height to cab upper part | 2850 mm | 7. Height to cab upper part | 3000 mm |
8. Rear platform swing radius | 1650 mm | 8. Rear platform swing radius | 1600 mm |
2. Overall width | 1925 mm | 2. Overall width | 2500 mm |
4. Wheelbase | 2100 mm | 4. Wheelbase | 2600 mm |
Boom/section options 1
9. Maximum cut height | 6260 mm | 9. Maximum cut height | 8240 mm |
10. Maximum loading height | 4530 mm | 10. Maximum loading height | 6040 mm |
11. Maximum radius along ground level | 6430 mm | 11. Maximum radius along ground level | 8300 mm |
13. Maximum excavation depth | 3800 mm | 13. Maximum excavation depth | 4315 mm |