vs.

      JCB JS145W vs. Liebherr A900CUS

      8 reasons to buy JCB JS145W:

      Swing device

      Rotation speed 13.4 rev / min and 9 rev / min 33 % more or 4.4 rev

      Operation

      Hydraulic system overflow valve pressure 34294.5 kPa and 243 kPa 99 % more or 34051.5 kPa

      Motor

      Power measured at 2200 rev / min and 1800 rev / min 18 % more or 400 rev

      Gear box

      Maximum travel speed 30 km/h and 28 km/h 7 % more or 2 km/h

      Boom/section options 4

      Maximum vertical wall digging depth 4240 mm and 3962.4 mm 7 % more or 277.6 mm

      Boom/section options 3

      Maximum vertical wall digging depth 5050 mm and 4114.8 mm 19 % more or 935.2 mm

      Boom/section options 2

      Maximum vertical wall digging depth 4600 mm and 3962.4 mm 14 % more or 637.6 mm

      Boom/section options 1

      Maximum vertical wall digging depth 4200 mm and 3810 mm 9 % more or 390 mm

      19 reasons to buy Liebherr A900CUS:

      Sizes

      Clearance 381 mm and 350 mm 8 % more or 31 mm
      Upper structure clearance 1243.6 mm and 1240 mm 0 % more or 3.6 mm

      Operation

      Hydraulic system fluid volume 321.8 l. and 124 l. 61 % more or 197.8 l.
      Generator current strength 55 amperes and 50 amperes 9 % more or 5 amperes
      Fuel Capacity 299 l. and 240 l. 20 % more or 59 l.
      Hydraulic pump flow rate 268.8 l/min and 276 l/min 3 % less or 7.2 l/min

      Motor

      Displacement 6.6 l. and 4.3 l. 35 % more or 2.3 l.

      Boom/section options 4

      Maximum excavation depth 5510.8 mm and 5020 mm 9 % more or 490.8 mm
      Maximum radius along ground level 8991.6 mm and 8140 mm 9 % more or 851.6 mm
      Maximum loading height 7391.4 mm and 7275 mm 2 % more or 116.4 mm

      Boom/section options 3

      Maximum radius along ground level 9195.8 mm and 8585 mm 7 % more or 610.8 mm
      Maximum loading height 7543.8 mm and 7400 mm 2 % more or 143.8 mm
      Maximum excavation depth 5690.6 mm and 5675 mm 0 % more or 15.6 mm

      Boom/section options 2

      Maximum excavation depth 5510.8 mm and 5175 mm 6 % more or 335.8 mm
      Maximum radius along ground level 8991.6 mm and 8125 mm 10 % more or 866.6 mm
      Maximum loading height 7339.6 mm and 7050 mm 4 % more or 289.6 mm

      Boom/section options 1

      Maximum excavation depth 5309.6 mm and 4775 mm 10 % more or 534.6 mm
      Maximum radius along ground level 8787.4 mm and 7745 mm 12 % more or 1042.4 mm
      Maximum loading height 7187.2 mm and 6780 mm 6 % more or 407.2 mm

      Neutral reasons:

      Sizes

      Overall width 2490 mm and 2490.2 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size dual: 10x20 16PR, single: 18Rx19.5(Radial) and 10.00-20

      Motor

      Manufacturer Isuzu and Liebherr
      Model A4BGITRA-05 2 level and D924 TI-E
      Cylinders number 4 and 4
      Aspiration turbocharging and Direct injection with turbocharging and charge air cooling, a reduced amount of emissions

      Gear box

      Reverse gears number 2 and 2
      Transmission type hydrostatic powershift transmission and oversized 2-speed gearbox with shift under full load with an extra low gear
      Forward gears number 2 and 2

      Boom/section options 4

      Option - Boom/Section (MEX) 4 triple stage articulated boom 5000mm with lever 2100mm and 11.83 boom / 7.42 ft. Section
      Unit load-transfer height 3040 mm and 3148.6 mm
      Unit load-transfer length 7310 mm and 8558.8 mm
      Maximum cut height 9675 mm and 10210.8 mm

      Boom/section options 3

      Maximum cut height 9775 mm and 10338.8 mm
      Option - Boom/Section (MEX) 3 Monoblock boom 4700mm with lever 3000mm and 11.17 boom / 8.67 ft. Section
      Unit load-transfer height 3040 mm and 3148.6 mm
      Unit load-transfer length 7630 mm and 8558.8 mm

      Boom/section options 2

      Option - Boom/Section (MEX) 2 Monoblock boom 4700mm with lever 2500mm and 11.17 boom / 8 ft. Section
      Unit load-transfer height 3040 mm and 3148.6 mm
      Unit load-transfer length 7600 mm and 8558.8 mm
      Maximum cut height 9455 mm and 10210.8 mm

      Boom/section options 1

      Unit load-transfer height 3040 mm and 3148.6 mm
      Unit load-transfer length 7580 mm and 8558.8 mm
      Option - Boom/Section (MEX) 1 Monoblock boom 4700mm with lever 2100mm and 11.17 ft. boom / 7.42 ft. Section
      Maximum cut height 9185 mm and 10058.4 mm

      Images

      Sizes

      2. Overall width 2490 mm 2. Overall width 2490.2 mm
      5. Clearance 350 mm 5. Clearance 381 mm
      14. Upper structure clearance 1240 mm 14. Upper structure clearance 1243.6 mm

      Boom/section options 1

      9. Maximum cut height 9775 mm 9. Maximum cut height 10210.8 mm
      13. Maximum excavation depth 5175 mm 13. Maximum excavation depth 5510.8 mm
      10. Maximum loading height 7400 mm 10. Maximum loading height 7339.6 mm
      1. Unit load-transfer length 7630 mm 1. Unit load-transfer length 8558.8 mm
      11. Maximum radius along ground level 8585 mm 11. Maximum radius along ground level 8991.6 mm
      3. Unit load-transfer height 3040 mm 3. Unit load-transfer height 3148.6 mm
      12. Maximum vertical wall digging depth 5050 mm 12. Maximum vertical wall digging depth 3962.4 mm