vs.

      JCB JS200W vs. Terex HML42

      11 reasons to buy JCB JS200W:

      Operation

      Fuel Capacity 310 l. and 240 l. 23 % more or 70 l.
      Hydraulic system fluid volume 200 l. and 190 l. 5 % more or 10 l.
      Hydraulic system overflow valve pressure 34301.4 kPa and 27992.7 kPa 18 % more or 6308.7 kPa

      Motor

      Cylinders number 6 and 4 33 % more or 2
      Effective power 102.9 kW and 67.9 kW 34 % more or 35.0 kW
      Displacement 6.5 l. and 4 l. 38 % more or 2.5 l.

      Gear box

      Maximum travel speed 30 km/h and 20 km/h 33 % more or 10 km/h

      Boom/section options 1

      Maximum excavation depth 5260 mm and 4315 mm 18 % more or 945 mm
      Maximum radius along ground level 8870 mm and 8300 mm 6 % more or 570 mm
      Maximum loading height 6470 mm and 6040 mm 7 % more or 430 mm
      Maximum vertical wall digging depth 4540 mm and 3665 mm 19 % more or 875 mm

      3 reasons to buy Terex HML42:

      Sizes

      Clearance 440 mm and 350 mm 20 % more or 90 mm

      Operation

      Hydraulic pump flow rate 200.2 l/min and 399 l/min 50 % less or 198.8 l/min

      Motor

      Power measured at 2000 rev / min and 1950 rev / min 2 % more or 50 rev

      Neutral reasons:

      Swing device

      Rotation speed 10 rev / min and 10 rev / min

      Sizes

      Overall width 2490 mm and 2500 mm
      Height to cab upper part 3150 mm and 3000 mm

      Operation

      Operating voltage 24 V and 12 V
      Type of hydraulic pump hydraulic system with load sensing with dual piston variable displacement pumps providing flow on demand for maximum productivity and load-sensing axial piston pump
      Oscillatory axle angle 17 degrees and 26 degrees
      Tyre size dual: 11x20 10PR, single: 18Rx22.5 (Radial) and 9-20

      Gear box

      Forward gears number 2 and 2
      Reverse gears number 2 and 2
      Transmission type hydrostatic powershift transmission and hydrostatic

      Boom/section options 1

      Option - Boom/Section (MEX) 1 Monoblock boom with 1910mm excavator bucket and two-piece articulated boom with dipper 2000mm
      Maximum cut height 9190 mm and 8240 mm

      Images

      Sizes

      5. Clearance 350 mm 5. Clearance 440 mm
      7. Height to cab upper part 3150 mm 7. Height to cab upper part 3000 mm
      2. Overall width 2490 mm 2. Overall width 2500 mm

      Boom/section options 1

      9. Maximum cut height 9630 mm 9. Maximum cut height 8240 mm
      10. Maximum loading height 6980 mm 10. Maximum loading height 6040 mm
      11. Maximum radius along ground level 9850 mm 11. Maximum radius along ground level 8300 mm
      12. Maximum vertical wall digging depth 5840 mm 12. Maximum vertical wall digging depth 3665 mm
      13. Maximum excavation depth 6370 mm 13. Maximum excavation depth 4315 mm