vs.

      John Deere 210CW vs. New Holland MH4.6

      17 reasons to buy John Deere 210CW:

      Swing device

      Rotation speed 13.6 rev / min and 8.3 rev / min 39 % more or 5.3 rev

      Sizes

      Upper structure clearance 1275 mm and 1205 mm 5 % more or 70 mm

      Operation

      Fuel Capacity 340 l. and 250 l. 26 % more or 90 l.
      Engine oil volume 25 l. and 12.5 l. 50 % more or 12.5 l.
      Hydraulic system fluid volume 310 l. and 200 l. 35 % more or 110 l.

      Motor

      Displacement 6.5 l. and 3.9 l. 40 % more or 2.6 l.
      Cylinders number 6 and 4 33 % more or 2
      Effective power 110.4 kW and 88 kW 20 % more or 22.4 kW
      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev

      Boom/section options 2

      Maximum loading height 7350 mm and 7195 mm 2 % more or 155 mm
      Maximum vertical wall digging depth 5330 mm and 4435 mm 17 % more or 895 mm
      Maximum excavation depth 6070 mm and 5565 mm 8 % more or 505 mm
      Maximum radius along ground level 9660 mm and 8490 mm 12 % more or 1170 mm

      Boom/section options 1

      Maximum excavation depth 6420 mm and 5180 mm 19 % more or 1240 mm
      Maximum radius along ground level 9950 mm and 8125 mm 18 % more or 1825 mm
      Maximum loading height 7040 mm and 6915 mm 2 % more or 125 mm
      Maximum vertical wall digging depth 5800 mm and 3945 mm 32 % more or 1855 mm

      5 reasons to buy New Holland MH4.6:

      Sizes

      Clearance 395 mm and 340 mm 14 % more or 55 mm

      Operation

      Cooling system fluid volume 24 l. and 23 l. 4 % more or 1 l.
      Generator current strength 70 amperes and 50 amperes 29 % more or 20 amperes
      Hydraulic pump flow rate 182 l/min and 428 l/min 57 % less or 246 l/min

      Gear box

      Maximum travel speed 34.5 km/h and 25 km/h 28 % more or 9.5 km/h

      Neutral reasons:

      Sizes

      Height to cab upper part 3110 mm and 3110 mm
      Wheelbase 2750 mm and 2550 mm
      Rear platform swing radius 2700 mm and 1945 mm
      Overall width 2500 mm and 2530 mm
      Overall width with lowered supports 3700 mm and 3660 mm

      Operation

      Working weight 20600 kg and 16000 kg
      Operating voltage 24 V and 24 V
      Oscillatory axle angle 12 degrees and 14 degrees

      Motor

      Aspiration turbocharging and Turbocharging with intercooler
      Model 6BG1T and CNH F4BE0484E*D601

      Boom/section options 2

      Maximum cut height 10260 mm and 9640 mm
      Option - Boom/Section (MEX) 2 two-piece boom/9 ft. 7 inch. (2910mm) with lever and triple stage articulated boom / Section 2500mm
      Unit load-transfer height 3440 mm and 3110 mm
      Unit load-transfer length 9370 mm and 7825 mm

      Boom/section options 1

      Option - Boom/Section (MEX) 1 Monoblock boom/9 ft. 7 inch. (2910mm) with lever and triple stage articulated boom /Section 2100mm
      Unit load-transfer height 3110 mm and 3110 mm
      Unit load-transfer length 9810 mm and 7740 mm
      Maximum cut height 9850 mm and 9360 mm

      Images

      Sizes

      14. Upper structure clearance 1275 mm 14. Upper structure clearance 1205 mm
      2. Overall width 2500 mm 2. Overall width 2530 mm
      4. Wheelbase 2750 mm 4. Wheelbase 2550 mm
      5. Clearance 340 mm 5. Clearance 395 mm
      6. Overall width with lowered supports 3700 mm 6. Overall width with lowered supports 3660 mm
      7. Height to cab upper part 3110 mm 7. Height to cab upper part 3110 mm
      8. Rear platform swing radius 2700 mm 8. Rear platform swing radius 1945 mm

      Boom/section options 1

      1. Unit load-transfer length 9370 mm 1. Unit load-transfer length 7650 mm
      3. Unit load-transfer height 3440 mm 3. Unit load-transfer height 3325 mm
      9. Maximum cut height 10260 mm 9. Maximum cut height 10080 mm
      10. Maximum loading height 7350 mm 10. Maximum loading height 7635 mm
      11. Maximum radius along ground level 9660 mm 11. Maximum radius along ground level 8995 mm
      12. Maximum vertical wall digging depth 5330 mm 12. Maximum vertical wall digging depth 4945 mm
      13. Maximum excavation depth 6070 mm 13. Maximum excavation depth 6065 mm