vs.

      John Deere 220DW vs. New Holland MHPlusC

      14 reasons to buy John Deere 220DW:

      Swing device

      Rotation speed 12.2 rev / min and 9 rev / min 26 % more or 3.2 rev

      Sizes

      Upper structure clearance 1230 mm and 1220 mm 1 % more or 10 mm

      Operation

      Hydraulic system fluid volume 340 l. and 240 l. 29 % more or 100 l.
      Fuel Capacity 355 l. and 250 l. 30 % more or 105 l.
      Engine oil volume 23 l. and 17 l. 26 % more or 6 l.

      Gear box

      Maximum travel speed 37.5 km/h and 37 km/h 1 % more or 0.5 km/h

      Boom/section options 2

      Maximum excavation depth 6080 mm and 5710 mm 6 % more or 370 mm
      Maximum radius along ground level 9750 mm and 8695 mm 11 % more or 1055 mm
      Maximum loading height 7630 mm and 6670 mm 13 % more or 960 mm
      Maximum vertical wall digging depth 5250 mm and 4755 mm 9 % more or 495 mm

      Boom/section options 1

      Maximum radius along ground level 9960 mm and 8490 mm 15 % more or 1470 mm
      Maximum loading height 7350 mm and 6495 mm 12 % more or 855 mm
      Maximum excavation depth 6290 mm and 5510 mm 12 % more or 780 mm
      Maximum vertical wall digging depth 5600 mm and 4535 mm 19 % more or 1065 mm

      8 reasons to buy New Holland MHPlusC:

      Sizes

      Clearance 340 mm and 330 mm 3 % more or 10 mm

      Operation

      Generator current strength 70 amperes and 50 amperes 29 % more or 20 amperes
      Hydraulic system overflow valve pressure 35000 kPa and 34301.4 kPa 2 % more or 698.6 kPa
      Hydraulic pump flow rate 252 l/min and 378 l/min 33 % less or 126 l/min
      Cooling system fluid volume 31 l. and 26 l. 16 % more or 5 l.

      Motor

      Effective power 119.3 kW and 118.6 kW 1 % more or 0.7 kW
      Displacement 5.9 l. and 5.2 l. 12 % more or 0.7 l.
      Cylinders number 6 and 4 33 % more or 2

      Neutral reasons:

      Sizes

      Overall width with lowered supports 3440 mm and 3625 mm
      Overall width 2730 mm and 2530 mm
      Height to cab upper part 3170 mm and 3140 mm
      Wheelbase 2750 mm and 2550 mm
      Rear platform swing radius 2750 mm and 2145 mm

      Operation

      Operating voltage 24 V and 24 V
      Oscillatory axle angle 7 degrees and 14 degrees
      Tyre size 10.00-20, 16 PR and 10.00-20
      Working weight 22629 kg and 18050 kg

      Motor

      Model 4HK1X, III Level III certified and CNH F4BE0684B*D401
      Power measured at 2000 rev / min and 2000 rev / min
      Aspiration Turbocharging with intercooler and Turbocharging with subsequent air cooling (by a cooling radiator)

      Boom/section options 2

      Option - Boom/Section (MEX) 2 two-piece boom / Section 9'7" (2910mm) and 2pc Boom / Section 2400mm
      Unit load-transfer height 3390 mm and 3140 mm
      Unit load-transfer length 9320 mm and 7945 mm
      Maximum cut height 10560 mm and 9565 mm

      Boom/section options 1

      Unit load-transfer height 2990 mm and 3140 mm
      Maximum cut height 10190 mm and 9390 mm
      Unit load-transfer length 9700 mm and 7925 mm
      Option - Boom/Section (MEX) 1 one-piece boom 18' 8" (5680mm) / Section 9'7"(2910mm) and 2pc Boom / Section 2200mm

      Images

      Sizes

      2. Overall width 2730 mm 2. Overall width 2530 mm
      4. Wheelbase 2750 mm 4. Wheelbase 2550 mm
      5. Clearance 330 mm 5. Clearance 340 mm
      6. Overall width with lowered supports 3440 mm 6. Overall width with lowered supports 3625 mm
      7. Height to cab upper part 3170 mm 7. Height to cab upper part 3140 mm
      8. Rear platform swing radius 2750 mm 8. Rear platform swing radius 2145 mm
      14. Upper structure clearance 1230 mm 14. Upper structure clearance 1220 mm

      Boom/section options 1

      11. Maximum radius along ground level 9750 mm 11. Maximum radius along ground level 8490 mm
      1. Unit load-transfer length 9320 mm 1. Unit load-transfer length 7945 mm
      12. Maximum vertical wall digging depth 5250 mm 12. Maximum vertical wall digging depth 4535 mm
      3. Unit load-transfer height 3390 mm 3. Unit load-transfer height 3140 mm
      13. Maximum excavation depth 6080 mm 13. Maximum excavation depth 5510 mm
      9. Maximum cut height 10560 mm 9. Maximum cut height 9565 mm
      10. Maximum loading height 7630 mm 10. Maximum loading height 6670 mm