vs.

      John Deere 75C vs. Liebherr A914C

      3 reasons to buy John Deere 75C:

      Swing device

      Swing torque 13840 Nm and 66 Nm 100 % more or 13774 Nm

      Sizes

      Clearance 430 mm and 345 mm 20 % more or 85 mm

      Operation

      Hydraulic pump flow rate 52.5 l/min and 430 l/min 88 % less or 377.5 l/min

      26 reasons to buy Liebherr A914C:

      Swing device

      Rotation speed 9 rev / min and -11 rev / min 222 % more or 20 rev

      Sizes

      Upper structure clearance 1280 mm and 1210 mm 5 % more or 70 mm

      Operation

      Fuel Capacity 400 l. and 120 l. 70 % more or 280 l.
      Hydraulic system fluid volume 430 l. and 100 l. 77 % more or 330 l.
      Generator current strength 80 amperes and 30 amperes 62 % more or 50 amperes
      Hydraulic system overflow valve pressure 35000 kPa and 25988 kPa 26 % more or 9012 kPa

      Motor

      Displacement 6.4 l. and 3.1 l. 52 % more or 3.3 l.

      Gear box

      Forward gears number 4 and 1 75 % more or 3
      Reverse gears number 4 and 1 75 % more or 3
      Maximum travel speed 20 km/h and -5 km/h 125 % more or 25 km/h

      Boom/section options 4

      Maximum loading height 8050 mm and 5.5 mm 100 % more or 8044.5 mm
      Maximum excavation depth 6750 mm and 4.6 mm 100 % more or 6745.4 mm
      Maximum vertical wall digging depth 4900 mm and 4.2 mm 100 % more or 4895.8 mm
      Maximum radius along ground level 10200 mm and 6.8 mm 100 % more or 10193.2 mm

      Boom/section options 3

      Maximum vertical wall digging depth 4500 mm and 4.2 mm 100 % more or 4495.8 mm
      Maximum excavation depth 6350 mm and 4.6 mm 100 % more or 6345.4 mm
      Maximum radius along ground level 9850 mm and 6.8 mm 100 % more or 9843.2 mm
      Maximum loading height 7800 mm and 5.5 mm 100 % more or 7794.5 mm

      Boom/section options 2

      Maximum excavation depth 6150 mm and 4.6 mm 100 % more or 6145.4 mm
      Maximum radius along ground level 9650 mm and 6.8 mm 100 % more or 9643.2 mm
      Maximum loading height 7650 mm and 5.5 mm 100 % more or 7644.5 mm
      Maximum vertical wall digging depth 4350 mm and 4.2 mm 100 % more or 4345.8 mm

      Boom/section options 1

      Maximum excavation depth 5950 mm and 4.6 mm 100 % more or 5945.4 mm
      Maximum radius along ground level 9450 mm and 6.8 mm 100 % more or 9443.2 mm
      Maximum loading height 7500 mm and 5.5 mm 100 % more or 7494.5 mm
      Maximum vertical wall digging depth 4200 mm and 4.2 mm 100 % more or 4195.8 mm

      Neutral reasons:

      Sizes

      Overall width 2330 mm and 2550 mm
      Overall width with lowered supports 1870 mm and 4015 mm

      Operation

      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Isuzu and Liebherr
      Model CC-4JG1 and D 934 S

      Gear box

      Transmission type Diesel engine with direct injection and natural aspiration and oversized 2-speed gearbox with shift under full load with an extra low gear

      Boom/section options 4

      Unit load-transfer length 6 mm and 9550 mm
      Maximum cut height 7.6 mm and 11250 mm

      Boom/section options 3

      Unit load-transfer length 6 mm and 9550 mm
      Maximum cut height 7.6 mm and 11000 mm

      Boom/section options 2

      Unit load-transfer length 6 mm and 9550 mm
      Maximum cut height 7.6 mm and 10850 mm

      Boom/section options 1

      Maximum cut height 7.6 mm and 1065 mm
      Unit load-transfer length 6 mm and 9550 mm

      Images

      Sizes

      2. Overall width 2330 mm 2. Overall width 2550 mm
      5. Clearance 430 mm 5. Clearance 345 mm
      6. Overall width with lowered supports 1870 mm 6. Overall width with lowered supports 4015 mm
      14. Upper structure clearance 1210 mm 14. Upper structure clearance 1280 mm

      Boom/section options 1

      12. Maximum vertical wall digging depth 4.2 mm 12. Maximum vertical wall digging depth 4350 mm
      13. Maximum excavation depth 4.6 mm 13. Maximum excavation depth 5950 mm
      1. Unit load-transfer length 6 mm 1. Unit load-transfer length 9550 mm
      9. Maximum cut height 7.6 mm 9. Maximum cut height 10850 mm
      10. Maximum loading height 5.5 mm 10. Maximum loading height 7650 mm
      11. Maximum radius along ground level 6.8 mm 11. Maximum radius along ground level 9650 mm