- Home/
- Comparison/
- Wheeled Excavator/
- Liebherr A900C vs. Terex 1604MK
Liebherr A900C vs. Terex 1604MK
6 reasons to buy Liebherr A900C:
Operation
Fuel Capacity | 300 l. and 230 l. | 23 % more or 70 l. |
Hydraulic system fluid volume | 320 l. and 300 l. | 6 % more or 20 l. |
Hydraulic system overflow valve pressure | 35000 kPa and 34000 kPa | 3 % more or 1000 kPa |
Hydraulic pump flow rate | 270 l/min and 300 l/min | 10 % less or 30 l/min |
Motor
Displacement | 6.6 l. and 3.2 l. | 52 % more or 3.4 l. |
Boom/section options 3
Maximum excavation depth | 5900 mm and 5700 mm | 3 % more or 200 mm |
7 reasons to buy Terex 1604MK:
Swing device
Swing torque | 59000 Nm and 42 Nm | 100 % more or 58958 Nm |
Sizes
Clearance | 350 mm and 30 mm | 91 % more or 320 mm |
Upper structure clearance | 1250 mm and 1235 mm | 1 % more or 15 mm |
Motor
Effective power | 93 kW and 89.5 kW | 4 % more or 3.5 kW |
Power measured at | 2300 rev / min and 1800 rev / min | 22 % more or 500 rev |
Boom/section options 4
Maximum excavation depth | 6300 mm and 5400 mm | 14 % more or 900 mm |
Boom/section options 2
Maximum excavation depth | 6000 mm and 5700 mm | 5 % more or 300 mm |
Neutral reasons:
Swing device
Rotation speed | 9 rev / min and 9 rev / min |
Sizes
Overall width | 2550 mm and 2550 mm |
Height to cab upper part | 3160 mm and 3020 mm |
Wheelbase | 2540 mm and 2550 mm |
Operation
Operating voltage | 24 V and 24 V |
Type of hydraulic pump | Variable Displacement Axial Cam Pump and 1x axial piston pump |
Tyre size | 10.00-20 and 10.00-20 |
Motor
Manufacturer | Liebherr and Deutz |
Model | D 924 TI-E and BF4M 2012 C |
Aspiration | turbocharging and subsequent cooling, reduced amount of emissions and turbocharging |
Gear box
Transmission type | oversized 2-speed gearbox with shift under full load with an extra low gear and planetary gear |
Maximum travel speed | 20 km/h and 20 km/h |
Boom/section options 4
Option - Boom/Section (MEX) 4 | 5 m boom / 2.25 Section and Monoblock boom 2700mm |
Maximum cut height | 9000 mm and 9500 mm |
Boom/section options 3
Option - Boom/Section (MEX) 3 | 3.6 m boom / 2.65 m Section and Monoblock boom 2200mm |
Maximum cut height | 10550 mm and 9100 mm |
Boom/section options 2
Option - Boom/Section (MEX) 2 | 3.6 m boom / 2.45 m Section and Hydraulic adjustable boom 2700mm |
Maximum cut height | 10350 mm and 9850 mm |
Boom/section options 1
Option - Boom/Section (MEX) 1 | 3.6 m boom / 2.25 m Section and Hydraulic adjustable boom 2200mm |
Maximum excavation depth | 5500 mm and 5500 mm |
Maximum cut height | 10200 mm and 9500 mm |
Images
Sizes
2. Overall width | 2550 mm | 2. Overall width | 2550 mm |
4. Wheelbase | 2540 mm | 4. Wheelbase | 2550 mm |
5. Clearance | 30 mm | 5. Clearance | 350 mm |
7. Height to cab upper part | 3160 mm | 7. Height to cab upper part | 3020 mm |
14. Upper structure clearance | 1235 mm | 14. Upper structure clearance | 1250 mm |
Boom/section options 1
13. Maximum excavation depth | 5400 mm | 13. Maximum excavation depth | 6300 mm |
9. Maximum cut height | 10200 mm | 9. Maximum cut height | 9500 mm |