vs.

      Liebherr A900CUS vs. John Deere 210CW

      7 reasons to buy Liebherr A900CUS:

      Sizes

      Clearance 381 mm and 340 mm 11 % more or 41 mm

      Operation

      Hydraulic pump flow rate 268.8 l/min and 428 l/min 37 % less or 159.2 l/min
      Generator current strength 55 amperes and 50 amperes 9 % more or 5 amperes
      Hydraulic system fluid volume 321.8 l. and 310 l. 4 % more or 11.8 l.

      Motor

      Displacement 6.6 l. and 6.5 l. 2 % more or 0.1 l.

      Gear box

      Maximum travel speed 28 km/h and 25 km/h 11 % more or 3 km/h

      Boom/section options 1

      Maximum loading height 7187.2 mm and 7040 mm 2 % more or 147.2 mm

      14 reasons to buy John Deere 210CW:

      Swing device

      Rotation speed 13.6 rev / min and 9 rev / min 34 % more or 4.6 rev
      Swing torque 43218 lb / ft and 31 lb / ft 100 % more or 43187 lb

      Sizes

      Upper structure clearance 1275 mm and 1243.6 mm 2 % more or 31.4 mm

      Operation

      Hydraulic system overflow valve pressure 34335.9 kPa and 243 kPa 99 % more or 34092.9 kPa
      Fuel Capacity 340 l. and 299 l. 12 % more or 41 l.

      Motor

      Power measured at 2100 rev / min and 1800 rev / min 14 % more or 300 rev
      Cylinders number 6 and 4 33 % more or 2

      Boom/section options 2

      Maximum excavation depth 6070 mm and 5510.8 mm 9 % more or 559.2 mm
      Maximum radius along ground level 9660 mm and 8991.6 mm 7 % more or 668.4 mm
      Maximum loading height 7350 mm and 7339.6 mm 0 % more or 10.4 mm
      Maximum vertical wall digging depth 5330 mm and 3962.4 mm 26 % more or 1367.6 mm

      Boom/section options 1

      Maximum vertical wall digging depth 5800 mm and 3810 mm 34 % more or 1990 mm
      Maximum excavation depth 6420 mm and 5309.6 mm 17 % more or 1110.4 mm
      Maximum radius along ground level 9950 mm and 8787.4 mm 12 % more or 1162.6 mm

      Neutral reasons:

      Sizes

      Wheelbase 2539 mm and 2750 mm
      Overall width 2490.2 mm and 2500 mm
      Overall width with lowered supports 3682 mm and 3700 mm

      Operation

      Operating voltage 24 V and 24 V

      Motor

      Model D924 TI-E and 6BG1T
      Manufacturer Liebherr and Isuzu
      Aspiration Direct injection with turbocharging and charge air cooling, a reduced amount of emissions and turbocharging

      Gear box

      Forward gears number 2 and 2
      Reverse gears number 2 and 2

      Boom/section options 2

      Maximum cut height 10210.8 mm and 10260 mm
      Option - Boom/Section (MEX) 2 11.17 boom / 8 ft. Section and two-piece boom/9 ft. 7 inch. (2910mm) with lever
      Unit load-transfer height 3148.6 mm and 3440 mm
      Unit load-transfer length 8558.8 mm and 9370 mm

      Boom/section options 1

      Maximum cut height 10058.4 mm and 9850 mm
      Option - Boom/Section (MEX) 1 11.17 ft. boom / 7.42 ft. Section and Monoblock boom/9 ft. 7 inch. (2910mm) with lever
      Unit load-transfer height 3148.6 mm and 3110 mm
      Unit load-transfer length 8558.8 mm and 9810 mm

      Images

      Sizes

      2. Overall width 2490.2 mm 2. Overall width 2500 mm
      4. Wheelbase 2539 mm 4. Wheelbase 2750 mm
      5. Clearance 381 mm 5. Clearance 340 mm
      6. Overall width with lowered supports 3682 mm 6. Overall width with lowered supports 3700 mm
      14. Upper structure clearance 1243.6 mm 14. Upper structure clearance 1275 mm

      Boom/section options 1

      10. Maximum loading height 7543.8 mm 10. Maximum loading height 7040 mm
      9. Maximum cut height 10338.8 mm 9. Maximum cut height 10260 mm
      11. Maximum radius along ground level 9195.8 mm 11. Maximum radius along ground level 9950 mm
      12. Maximum vertical wall digging depth 4114.8 mm 12. Maximum vertical wall digging depth 5800 mm
      13. Maximum excavation depth 5690.6 mm 13. Maximum excavation depth 6420 mm
      1. Unit load-transfer length 8558.8 mm 1. Unit load-transfer length 9370 mm
      3. Unit load-transfer height 3148.6 mm 3. Unit load-transfer height 3440 mm