vs.

      Liebherr A904C vs. Case WX125

      14 reasons to buy Liebherr A904C:

      Swing device

      Rotation speed 9 rev / min and 8.3 rev / min 8 % more or 0.7 rev

      Sizes

      Upper structure clearance 1235 mm and 1155 mm 6 % more or 80 mm

      Operation

      Hydraulic system fluid volume 330 l. and 110 l. 67 % more or 220 l.
      Fuel Capacity 340 l. and 162 l. 52 % more or 178 l.

      Motor

      Effective power 100.7 kW and 87.2 kW 13 % more or 13.5 kW
      Displacement 6.6 l. and 3.9 l. 41 % more or 2.7 l.

      Boom/section options 2

      Maximum excavation depth 6044.2 mm and 4838 mm 20 % more or 1206.2 mm
      Maximum radius along ground level 9296.4 mm and 8824 mm 5 % more or 472.4 mm
      Maximum loading height 7062.2 mm and 6510 mm 8 % more or 552.2 mm
      Maximum vertical wall digging depth 4419.6 mm and 2841 mm 36 % more or 1578.6 mm

      Boom/section options 1

      Maximum vertical wall digging depth 4267.2 mm and 2570 mm 40 % more or 1697.2 mm
      Maximum radius along ground level 9092.2 mm and 8474 mm 7 % more or 618.2 mm
      Maximum loading height 6858 mm and 6201 mm 10 % more or 657 mm
      Maximum excavation depth 5850 mm and 4491 mm 23 % more or 1359 mm

      5 reasons to buy Case WX125:

      Swing device

      Swing torque 26000 Nm and 46 Nm 100 % more or 25954 Nm

      Sizes

      Clearance 360 mm and 350 mm 3 % more or 10 mm

      Operation

      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes
      Hydraulic pump flow rate 151 l/min and 330 l/min 54 % less or 179 l/min

      Gear box

      Maximum travel speed 33 km/h and 20 km/h 39 % more or 13 km/h

      Neutral reasons:

      Sizes

      Rear platform swing radius 2485 mm and 1670 mm
      Overall width 2480 mm and 2480 mm
      Height to cab upper part 3160 mm and 3085 mm
      Wheelbase 2750 mm and 2400 mm

      Operation

      Operating voltage 24 V and 24 V
      Hydraulic system overflow valve pressure 35000 kPa and 35000 kPa
      Tyre size 10.00-20 and 600/40-22.5
      Working weight 23500 kg and 12050 kg

      Motor

      Manufacturer Liebherr and Case
      Model D 924 TI-E and 439TA-M2
      Power measured at 2000 rev / min and 2000 rev / min
      Cylinders number 4 and 4
      Aspiration Direct injection with turbocharging and charge air cooling, a reduced amount of emissions and turbocharging

      Gear box

      Transmission type oversized 2-speed gearbox with shift under full load with an extra low gear and Hydro-Static Transmission
      Forward gears number 2 and 2
      Reverse gears number 2 and 2

      Boom/section options 2

      Option - Boom/Section (MEX) 2 Hydraulic adjustable boom 3800mm Section 2450mm and excavator bucket 2350mm
      Unit load-transfer height 3148.6 mm and 3085 mm
      Unit load-transfer length 9043.4 mm and 8095 mm
      Maximum cut height 10082.8 mm and 9080 mm

      Boom/section options 1

      Maximum cut height 9957.8 mm and 8759 mm
      Option - Boom/Section (MEX) 1 Hydraulic adjustable boom 3800mm Section 2250mm and excavator bucket 20000mm
      Unit load-transfer height 3148.6 mm and 3085 mm
      Unit load-transfer length 9043.4 mm and 7730 mm

      Images

      Sizes

      2. Overall width 2480 mm 2. Overall width 2480 mm
      4. Wheelbase 2750 mm 4. Wheelbase 2400 mm
      5. Clearance 350 mm 5. Clearance 360 mm
      7. Height to cab upper part 3160 mm 7. Height to cab upper part 3085 mm
      8. Rear platform swing radius 2485 mm 8. Rear platform swing radius 1670 mm
      14. Upper structure clearance 1235 mm 14. Upper structure clearance 1155 mm

      Boom/section options 1

      10. Maximum loading height 7138.4 mm 10. Maximum loading height 6201 mm
      11. Maximum radius along ground level 9500.6 mm 11. Maximum radius along ground level 8474 mm
      12. Maximum vertical wall digging depth 4572 mm 12. Maximum vertical wall digging depth 2570 mm
      13. Maximum excavation depth 6248.4 mm 13. Maximum excavation depth 4491 mm
      1. Unit load-transfer length 9000 mm 1. Unit load-transfer length 8095 mm
      3. Unit load-transfer height 3148.6 mm 3. Unit load-transfer height 3085 mm
      9. Maximum cut height 10210.8 mm 9. Maximum cut height 9080 mm