vs.

      Liebherr A904C vs. Liebherr A924C

      4 reasons to buy Liebherr A904C:

      Swing device

      Rotation speed 9 rev / min and 8 rev / min 11 % more or 1 rev

      Motor

      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev

      Boom/section options 3

      Maximum vertical wall digging depth 4572 mm and 4500 mm 2 % more or 72 mm

      Boom/section options 2

      Maximum vertical wall digging depth 4419.6 mm and 4400 mm 0 % more or 19.6 mm

      23 reasons to buy Liebherr A924C:

      Swing device

      Swing torque 74 Nm and 46 Nm 38 % more or 28 Nm

      Sizes

      Clearance 380 mm and 350 mm 8 % more or 30 mm
      Upper structure clearance 1295 mm and 1235 mm 5 % more or 60 mm

      Shovel

      Maximum bucket volume 1.4 m3 and 1 m3 29 % more or 0.4 m3

      Operation

      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes
      Hydraulic pump flow rate 215 l/min and 330 l/min 35 % less or 115 l/min
      Fuel Capacity 400 l. and 340 l. 15 % more or 60 l.
      Hydraulic system fluid volume 430 l. and 330 l. 23 % more or 100 l.

      Motor

      Displacement 7 l. and 6.6 l. 6 % more or 0.4 l.

      Boom/section options 4

      Maximum excavation depth 6750 mm and 6605 mm 2 % more or 145 mm
      Maximum radius along ground level 10200 mm and 9732.3 mm 5 % more or 467.7 mm
      Maximum loading height 8050 mm and 7062.2 mm 12 % more or 987.8 mm
      Maximum vertical wall digging depth 4900 mm and 4419.6 mm 10 % more or 480.4 mm

      Boom/section options 3

      Maximum excavation depth 6350 mm and 6248.4 mm 2 % more or 101.6 mm
      Maximum loading height 7800 mm and 7138.4 mm 8 % more or 661.6 mm
      Maximum radius along ground level 9850 mm and 9500.6 mm 4 % more or 349.4 mm

      Boom/section options 2

      Maximum excavation depth 6150 mm and 6044.2 mm 2 % more or 105.8 mm
      Maximum radius along ground level 9650 mm and 9296.4 mm 4 % more or 353.6 mm
      Maximum loading height 7650 mm and 7062.2 mm 8 % more or 587.8 mm

      Boom/section options 1

      Maximum loading height 7500 mm and 6858 mm 9 % more or 642 mm
      Maximum vertical wall digging depth 4300 mm and 4267.2 mm 1 % more or 32.8 mm
      Maximum excavation depth 5950 mm and 5850 mm 2 % more or 100 mm
      Maximum radius along ground level 9450 mm and 9092.2 mm 4 % more or 357.8 mm

      Neutral reasons:

      Sizes

      Wheelbase 2750 mm and 2750 mm
      Overall width 2480 mm and 2750 mm
      Overall width with lowered supports 3695 mm and 4260 mm

      Operation

      Hydraulic system overflow valve pressure 35000 kPa and 35000 kPa
      Tyre size 10.00-20 and 11.00-20
      Working weight 23500 kg and 25582.6 kg
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 4 and 4
      Aspiration Direct injection with turbocharging and charge air cooling, a reduced amount of emissions and turbocharging and subsequent cooling, reduced amount of emissions
      Manufacturer Liebherr and Liebherr
      Model D 924 TI-E and D 934 L

      Gear box

      Transmission type oversized 2-speed gearbox with shift under full load with an extra low gear and oversized 2-speed gearbox with shift under full load with an extra low gear
      Maximum travel speed 20 km/h and 20 km/h

      Boom/section options 4

      Option - Boom/Section (MEX) 4 Hydraulic adjustable boom 3800mm Section 3050mm and 3.9 m boom / 3.05 m Section
      Unit load-transfer height 3160 mm and 3215 mm
      Unit load-transfer length 9000 mm and 9600 mm
      Maximum cut height 10034 mm and 11250 mm

      Boom/section options 3

      Unit load-transfer length 8991.6 mm and 9600 mm
      Maximum cut height 10210.8 mm and 11000 mm
      Option - Boom/Section (MEX) 3 Hydraulic adjustable boom 3800mm Section 2650mm and 3.9 m boom / 2.65 m Section
      Unit load-transfer height 3148.6 mm and 3215 mm

      Boom/section options 2

      Maximum cut height 10082.8 mm and 10850 mm
      Option - Boom/Section (MEX) 2 Hydraulic adjustable boom 3800mm Section 2450mm and 3.9 m boom / 2.45 m Section
      Unit load-transfer height 3148.6 mm and 3215 mm
      Unit load-transfer length 9043.4 mm and 9600 mm

      Boom/section options 1

      Maximum cut height 9957.8 mm and 10650 mm
      Option - Boom/Section (MEX) 1 Hydraulic adjustable boom 3800mm Section 2250mm and 3.9 m boom / 2.25 m Section
      Unit load-transfer height 3148.6 mm and 3215 mm
      Unit load-transfer length 9043.4 mm and 9600 mm

      Images

      Sizes

      2. Overall width 2480 mm 2. Overall width 2750 mm
      4. Wheelbase 2750 mm 4. Wheelbase 2750 mm
      5. Clearance 350 mm 5. Clearance 380 mm
      6. Overall width with lowered supports 3695 mm 6. Overall width with lowered supports 4260 mm
      14. Upper structure clearance 1235 mm 14. Upper structure clearance 1295 mm

      Boom/section options 1

      9. Maximum cut height 9957.8 mm 9. Maximum cut height 10650 mm
      12. Maximum vertical wall digging depth 4267.2 mm 12. Maximum vertical wall digging depth 4900 mm
      3. Unit load-transfer height 3148.6 mm 3. Unit load-transfer height 3215 mm
      10. Maximum loading height 6858 mm 10. Maximum loading height 7500 mm
      13. Maximum excavation depth 5850 mm 13. Maximum excavation depth 6750 mm
      11. Maximum radius along ground level 9092.2 mm 11. Maximum radius along ground level 9450 mm
      1. Unit load-transfer length 9043.4 mm 1. Unit load-transfer length 9600 mm