- Home/
- Comparison/
- Wheeled Excavator/
- Terex HML32 vs. Doosan DX55W
Terex HML32 vs. Doosan DX55W
10 reasons to buy Terex HML32:
Swing device
Rotation speed | 10 rev / min and 8.7 rev / min | 13 % more or 1.3 rev |
Sizes
Clearance | 430 mm and 290 mm | 33 % more or 140 mm |
Operation
Fuel Capacity | 190 l. and 120 l. | 37 % more or 70 l. |
Hydraulic system fluid volume | 190 l. and 147.8 l. | 22 % more or 42.2 l. |
Generator current strength | 850 amperes and 60 amperes | 93 % more or 790 amperes |
Hydraulic system overflow valve pressure | 27992.7 kPa and 22500 kPa | 20 % more or 5492.7 kPa |
Motor
Effective power | 61.1 kW and 40.8 kW | 33 % more or 20.3 kW |
Displacement | 4 l. and 3.3 l. | 17 % more or 0.7 l. |
Boom/section options 1
Maximum excavation depth | 4080 mm and 3495 mm | 14 % more or 585 mm |
Maximum loading height | 5400 mm and 4265 mm | 21 % more or 1135 mm |
3 reasons to buy Doosan DX55W:
Operation
Hydraulic pump flow rate | 120 l/min and 142 l/min | 15 % less or 22 l/min |
Motor
Power measured at | 2400 rev / min and 2000 rev / min | 17 % more or 400 rev |
Gear box
Maximum travel speed | 30 km/h and 20 km/h | 33 % more or 10 km/h |
Neutral reasons:
Sizes
Overall width | 2500 mm and 1920 mm |
Height to cab upper part | 3000 mm and 2855 mm |
Wheelbase | 2200 mm and 2100 mm |
Operation
Oscillatory axle angle | 11.5 degrees and 10 degrees |
Tyre size | 8.25-20, 14PR dual and 12-16.5-12PR(OTR) |
Operating voltage | 12 V and 12 V |
Type of hydraulic pump | axial piston and 2 variable displacement twin pumps |
Motor
Model | BF4 M 2012 and 4TNV98-E |
Cylinders number | 4 and 4 |
Manufacturer | Deutz and Yanmar |
Gear box
Transmission type | Hydro-Static Transmission and hydrostatic mechanical shifting |
Boom/section options 1
Option - Boom/Section (MEX) 1 | double stage articulated boom and Boom 9'10" (3000mm)/Section 5'3" (1600mm) |
Maximum cut height | 7500 mm and 5980 mm |
Images
Sizes
2. Overall width | 2500 mm | 2. Overall width | 1920 mm |
4. Wheelbase | 2200 mm | 4. Wheelbase | 2100 mm |
5. Clearance | 430 mm | 5. Clearance | 290 mm |
7. Height to cab upper part | 3000 mm | 7. Height to cab upper part | 2855 mm |
Boom/section options 1
13. Maximum excavation depth | 4080 mm | 13. Maximum excavation depth | 3795 mm |
9. Maximum cut height | 7500 mm | 9. Maximum cut height | 5980 mm |
10. Maximum loading height | 5400 mm | 10. Maximum loading height | 4265 mm |