vs.

      Terex HML42 vs. New Holland MHPlusC

      3 reasons to buy Terex HML42:

      Swing device

      Rotation speed 10 rev / min and 9 rev / min 10 % more or 1 rev

      Sizes

      Clearance 440 mm and 340 mm 23 % more or 100 mm

      Operation

      Hydraulic pump flow rate 200.2 l/min and 252 l/min 21 % less or 51.8 l/min

      11 reasons to buy New Holland MHPlusC:

      Operation

      Hydraulic system overflow valve pressure 35000 kPa and 27992.7 kPa 20 % more or 7007.3 kPa
      Fuel Capacity 250 l. and 240 l. 4 % more or 10 l.
      Hydraulic system fluid volume 240 l. and 190 l. 21 % more or 50 l.

      Motor

      Effective power 119.3 kW and 67.9 kW 43 % more or 51.4 kW
      Displacement 5.9 l. and 4 l. 32 % more or 1.9 l.
      Cylinders number 6 and 4 33 % more or 2

      Gear box

      Maximum travel speed 37 km/h and 20 km/h 46 % more or 17 km/h

      Boom/section options 1

      Maximum radius along ground level 8490 mm and 8300 mm 2 % more or 190 mm
      Maximum vertical wall digging depth 4535 mm and 3665 mm 19 % more or 870 mm
      Maximum loading height 6495 mm and 6040 mm 7 % more or 455 mm
      Maximum excavation depth 5510 mm and 4315 mm 22 % more or 1195 mm

      Neutral reasons:

      Sizes

      Rear platform swing radius 1600 mm and 2145 mm
      Overall width 2500 mm and 2530 mm
      Height to cab upper part 3000 mm and 3140 mm
      Wheelbase 2600 mm and 2550 mm

      Operation

      Tyre size 9-20 and 10.00-20
      Oscillatory axle angle 26 degrees and 14 degrees
      Working weight 10990 kg and 18050 kg
      Operating voltage 12 V and 24 V

      Motor

      Model BF4 M 2012 and CNH F4BE0684B*D401
      Power measured at 2000 rev / min and 2000 rev / min

      Boom/section options 1

      Maximum cut height 8240 mm and 9390 mm
      Option - Boom/Section (MEX) 1 two-piece articulated boom with dipper 2000mm and 2pc Boom / Section 2200mm

      Images

      Sizes

      5. Clearance 440 mm 5. Clearance 340 mm
      7. Height to cab upper part 3000 mm 7. Height to cab upper part 3140 mm
      8. Rear platform swing radius 1600 mm 8. Rear platform swing radius 2145 mm
      2. Overall width 2500 mm 2. Overall width 2530 mm
      4. Wheelbase 2600 mm 4. Wheelbase 2550 mm

      Boom/section options 1

      12. Maximum vertical wall digging depth 3665 mm 12. Maximum vertical wall digging depth 5020 mm
      13. Maximum excavation depth 4315 mm 13. Maximum excavation depth 6000 mm
      9. Maximum cut height 8240 mm 9. Maximum cut height 9870 mm
      10. Maximum loading height 6040 mm 10. Maximum loading height 6990 mm
      11. Maximum radius along ground level 8300 mm 11. Maximum radius along ground level 9275 mm