vs.

      Bolinder Munktell VHK100 vs. Terex TG190

      6 reasons to buy Bolinder Munktell VHK100:

      Sizes

      Front part clearance 615 mm and 591 mm 4 % more or 24 mm

      Motor

      Displacement 6.7 l. and 6 l. 10 % more or 0.7 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2

      Front Axle

      Clearance 615 mm and 591 mm 4 % more or 24 mm

      Circle

      Maximum radius outside left tyres 1800 mm and 2220 mm 19 % less or 420 mm
      Right maximum radius outside tyres 1800 mm and 3180 mm 43 % less or 1380 mm

      9 reasons to buy Terex TG190:

      Steerage

      Turn radius 7.5 m and 9.9 m 24 % less or 2.4 m

      Operation

      Fuel Capacity 480 l. and 124.9 l. 74 % more or 355.1 l.
      Front axle standard operating weight 5000 kg and 2850 kg 43 % more or 2150 kg
      Rear axle standard operating weight 13700 kg and 6950 kg 49 % more or 6750 kg

      Motor

      Maximum power 138 kW and 74.6 kW 46 % more or 63.4 kW

      Gear box

      Reverse gears number 3 and 2 33 % more or 1
      Maximum forward speed 40 km/h and 33.8 km/h 15 % more or 6.2 km/h
      Maximum reverse gear 19.4 km/h and 8 km/h 59 % more or 11.4 km/h

      Dump

      Blade pulling at maximum weight 9835.2 kg and 4200 kg 57 % more or 5635.2 kg

      Neutral reasons:

      Sizes

      Height to cab upper part 2950 mm and 3300 mm
      Dimensional length 7520 mm and 10266 mm
      Between tyres width 2230 mm and 2490 mm
      Wheelbase 5500 mm and 6136 mm
      Blade base 2420 mm and 2638 mm
      Dual axis wheelbase 1450 mm and 1542 mm

      Operation

      Overall standard operating weight 9800 kg and 18700 kg
      Tyre size 13.00-24 12 layers and 14.00 -24TG
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Volvo and Cummins

      Front Axle

      Wheel tilt 23 degrees and 17 degrees

      Dump

      Left lateral displacement 840 mm and 1250 mm
      Lateral right shift 840 mm and 1250 mm
      Mouldboard width 3050 mm and 3660 mm
      Mouldboard height 610 mm and 630 mm

      Circle

      Maximum lifting above ground level 470 mm and 470 mm
      Diameter 1486 mm and 1510 mm

      Images

      Sizes

      8. Blade base 2420 mm 8. Blade base 2638 mm
      1. Dimensional length 7520 mm 1. Dimensional length 10266 mm
      2. Between tyres width 2230 mm 2. Between tyres width 2490 mm
      3. Height to cab upper part 2950 mm 3. Height to cab upper part 3300 mm
      4. Wheelbase 5500 mm 4. Wheelbase 6136 mm
      6. Front part clearance 615 mm 6. Front part clearance 591 mm
      7. Dual axis wheelbase 1450 mm 7. Dual axis wheelbase 1542 mm