vs.

      Bolinder Munktell VHK115 vs. John Deere 670D

      3 reasons to buy Bolinder Munktell VHK115:

      Operation

      Transmission fluid volume 74 l. and 22.7 l. 69 % more or 51.3 l.
      Circular gearbox fluid volume 25 l. and 5.7 l. 77 % more or 19.3 l.

      Circle

      Maximum lifting above ground level 575 mm and 470 mm 18 % more or 105 mm

      15 reasons to buy John Deere 670D:

      Steerage

      Turn radius 7 m and 9 m 22 % less or 2 m

      Sizes

      Front part clearance 638 mm and 607 mm 5 % more or 31 mm

      Operation

      Front axle standard operating weight 3855 kg and 3140 kg 19 % more or 715 kg
      Rear axle standard operating weight 10663 kg and 7730 kg 28 % more or 2933 kg
      Fuel Capacity 401.2 l. and 150 l. 63 % more or 251.2 l.
      Cooling system fluid volume 45.4 l. and 30 l. 34 % more or 15.4 l.

      Motor

      Displacement 6.8 l. and 6.7 l. 1 % more or 0.1 l.
      Effective speeds output 7-8 138 kW and 82 kW 41 % more or 56 kW
      Maximum power 138 kW and 82 kW 41 % more or 56 kW

      Gear box

      Reverse gears number 8 and 2 75 % more or 6
      Maximum forward speed 40 km/h and 34.7 km/h 13 % more or 5.3 km/h
      Maximum reverse gear 40 km/h and 8.2 km/h 79 % more or 31.8 km/h

      Front Axle

      Clearance 638 mm and 607 mm 5 % more or 31 mm

      Circle

      Maximum radius outside left tyres 2100 mm and 2380 mm 12 % less or 280 mm
      Right maximum radius outside tyres 2080 mm and 2380 mm 13 % less or 300 mm

      Neutral reasons:

      Sizes

      Height to cab upper part 3020 mm and 3180 mm
      Dimensional length 7750 mm and 8804 mm
      Between tyres width 2300 mm and 2510 mm
      Wheelbase 5560 mm and 6120 mm
      Blade base 2477 mm and 2568 mm
      Dual axis wheelbase 1508 mm and 1540 mm

      Operation

      Tyre size 13.00-24 12 layers and 14.00-24 12PR
      Operating voltage 24 V and 24 V
      Overall standard operating weight 10870 kg and 14519 kg

      Motor

      Manufacturer Volvo and John Deere
      Model D67 and 6068H

      Gear box

      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 23 degrees and 20 degrees

      Dump

      Mouldboard width 3680 mm and 3660 mm
      Mouldboard height 560 mm and 610 mm
      Mouldboard thickness 18 mm and 22 mm
      Left lateral displacement 1000 mm and 680 mm
      Lateral right shift 1000 mm and 680 mm

      Circle

      Diameter 1486 mm and 1524 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 7750 mm 1. Dimensional length 8804 mm
      2. Between tyres width 2300 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3020 mm 3. Height to cab upper part 3180 mm
      4. Wheelbase 5560 mm 4. Wheelbase 6120 mm
      6. Front part clearance 607 mm 6. Front part clearance 638 mm
      7. Dual axis wheelbase 1508 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2477 mm 8. Blade base 2568 mm