- Home/
- Comparison/
- Grader/
- Case 845 DHP vs. Caterpillar 120H ES
Case 845 DHP vs. Caterpillar 120H ES
7 reasons to buy Case 845 DHP:
Operation
Hydraulic system fluid volume | 180 l. and 68 l. | 62 % more or 112 l. |
Fuel Capacity | 340.7 l. and 284 l. | 17 % more or 56.7 l. |
Generator current strength | 80 amperes and 50 amperes | 37 % more or 30 amperes |
Motor
Effective speeds output 7-8 | 119 kW and 104.4 kW | 12 % more or 14.6 kW |
Maximum power | 119.3 kW and 104.4 kW | 12 % more or 14.9 kW |
Displacement | 6.7 l. and 6.6 l. | 1 % more or 0.1 l. |
Gear box
Maximum forward speed | 42.9 km/h and 42.6 km/h | 1 % more or 0.3 km/h |
4 reasons to buy Caterpillar 120H ES:
Hydraulic system
Pump flow rate | 148 l/min and 191.5 l/min | 23 % less or 43.5 l/min |
Gear box
Reverse gears number | 6 and 4 | 33 % more or 2 |
Maximum reverse gear | 33.7 km/h and 28.5 km/h | 15 % more or 5.2 km/h |
Circle
Maximum lifting above ground level | 457 mm and 444.5 mm | 3 % more or 12.5 mm |
Neutral reasons:
Steerage
Turn radius | 7.2 m and 7.2 m |
Left and right hinge connection | 25 degrees and 20 degrees |
Sizes
Height to cab upper part | 3340 mm and 3110 mm |
Dimensional length | 8534 mm and 8260 mm |
Between tyres width | 2510 mm and 2440 mm |
Wheelbase | 6219 mm and 5870 mm |
Blade base | 2562 mm and 2600 mm |
Operation
Overall standard operating weight | 13535 kg and 12518 kg |
Tyre size | 14.0 x 24 12PR TL G2 Firestone and 12-24 10PR (G-2) |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Cummins and Caterpillar |
Model | QSB 6.7, III Level III certified and 3116 DITA |
Hydraulic system
Type of pump | Gear pump with locking in the middle position, with load sensing and Axial-piston pump |
Gear box
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 17.5 degrees and 18 degrees |
General fluctuations | 19 degrees and 32 degrees |
Dump
Mouldboard width | 3658 mm and 3660 mm |
Mouldboard height | 559 mm and 610 mm |
Mouldboard thickness | 22.2 mm and 22 mm |
Images
Sizes
1. Dimensional length | 8534 mm | 1. Dimensional length | 8260 mm |
2. Between tyres width | 2510 mm | 2. Between tyres width | 2440 mm |
3. Height to cab upper part | 3340 mm | 3. Height to cab upper part | 3110 mm |
4. Wheelbase | 6219 mm | 4. Wheelbase | 5870 mm |
8. Blade base | 2562 mm | 8. Blade base | 2600 mm |