vs.

      Case 845 DHP vs. Caterpillar 16M

      6 reasons to buy Case 845 DHP:

      Steerage

      Turn radius 7.2 m and 8.9 m 19 % less or 1.7 m

      Operation

      Hydraulic system fluid volume 180 l. and 114 l. 37 % more or 66 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Hydraulic system

      Pump flow rate 191.5 l/min and 280 l/min 32 % less or 88.5 l/min

      Dump

      Maximum cutting depth 711.2 mm and 488 mm 31 % more or 223.2 mm

      Circle

      Maximum lifting above ground level 444.5 mm and 395 mm 11 % more or 49.5 mm

      16 reasons to buy Caterpillar 16M:

      Sizes

      Front part clearance 688 mm and 622 mm 10 % more or 66 mm
      Rear ground clearance 407 mm and 380 mm 7 % more or 27 mm

      Operation

      Cooling system fluid volume 46.5 l. and 40 l. 14 % more or 6.5 l.
      Fuel Capacity 511 l. and 340.7 l. 33 % more or 170.3 l.
      Rear differential/final drive fluid volume 114 l. and 12 l. 89 % more or 102 l.
      Circular gearbox fluid volume 8 l. and 2.8 l. 65 % more or 5.2 l.
      Each tandem case fluid volume 121.5 l. and 28.7 l. 76 % more or 92.8 l.
      Front axle standard operating weight 7112 kg and 3707 kg 48 % more or 3405 kg
      Rear axle standard operating weight 18948 kg and 9828 kg 48 % more or 9120 kg

      Motor

      Effective speeds output 7-8 232.7 kW and 119 kW 49 % more or 113.7 kW
      Maximum power 232.7 kW and 119.3 kW 49 % more or 113.4 kW
      Effective drives torque 7-8 1710 Nm and 746 Nm 56 % more or 964 Nm
      Displacement 12.5 l. and 6.7 l. 46 % more or 5.8 l.

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 53.9 km/h and 42.9 km/h 20 % more or 11.0 km/h
      Maximum reverse gear 42.6 km/h and 28.5 km/h 33 % more or 14.1 km/h

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 20 degrees

      Sizes

      Blade base 2562 mm and 3069 mm
      Dual axis wheelbase 1594 mm and 1841 mm
      Height to cab upper part 3340 mm and 3703 mm
      Dimensional length 8534 mm and 9963 mm
      Between tyres width 2510 mm and 3095 mm
      Wheelbase 6219 mm and 6985 mm

      Operation

      Tyre size 14.0 x 24 12PR TL G2 Firestone and 18.00-25 12PR (G-2)
      Overall standard operating weight 13535 kg and 26060 kg

      Motor

      Manufacturer Cummins and Caterpillar
      Model QSB 6.7, III Level III certified and C13 ACERT VHP
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Gear pump with locking in the middle position, with load sensing and variable displacement piston pump

      Gear box

      Transmission type Powershift of the camshaft with direct drive with electronic shift control and inching pedal and direct drive, powershift, camshaft
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 17.5 degrees and 18.2 degrees
      General fluctuations 19 degrees and 32 degrees

      Dump

      Left lateral displacement 533 mm and 740 mm
      Lateral right shift 686 mm and 1094 mm
      Mouldboard width 3658 mm and 4877 mm
      Mouldboard height 559 mm and 787 mm
      Mouldboard thickness 22.2 mm and 25 mm

      Circle

      Diameter 1752.6 mm and 1822 mm

      Images

      Sizes

      1. Dimensional length 8534 mm 1. Dimensional length 9963 mm
      2. Between tyres width 2510 mm 2. Between tyres width 3095 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3703 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6985 mm
      5. Rear ground clearance 380 mm 5. Rear ground clearance 407 mm
      6. Front part clearance 622 mm 6. Front part clearance 688 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1841 mm
      8. Blade base 2562 mm 8. Blade base 3069 mm