vs.

      Case 845 DHP vs. Dressta RD200C

      7 reasons to buy Case 845 DHP:

      Steerage

      Turn radius 7.2 m and 7500 m 100 % less or 7492.8 m

      Operation

      Generator current strength 80 amperes and 75 amperes 6 % more or 5 amperes
      Hydraulic system fluid volume 180 l. and 130 l. 28 % more or 50 l.
      Rear differential/final drive fluid volume 12 l. and 7.5 l. 37 % more or 4.5 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1

      Dump

      Maximum cutting depth 711.2 mm and 350 mm 51 % more or 361.2 mm

      9 reasons to buy Dressta RD200C:

      Operation

      Fuel Capacity 380 l. and 340.7 l. 10 % more or 39.3 l.
      Transmission fluid volume 35 l. and 25 l. 29 % more or 10 l.
      Each tandem case fluid volume 30 l. and 28.7 l. 4 % more or 1.3 l.

      Motor

      Power measured at 2400 rev / min and 2200 rev / min 8 % more or 200 rev
      Maximum power 132.7 kW and 119.3 kW 10 % more or 13.4 kW

      Hydraulic system

      Pump flow rate 80 l/min and 191.5 l/min 58 % less or 111.5 l/min

      Gear box

      Maximum forward speed 44.7 km/h and 42.9 km/h 4 % more or 1.8 km/h
      Maximum reverse gear 31.4 km/h and 28.5 km/h 9 % more or 2.9 km/h

      Circle

      Maximum lifting above ground level 500 mm and 444.5 mm 11 % more or 55.5 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Height to cab upper part 3340 mm and 3300 mm
      Dimensional length 8534 mm and 9540 mm
      Between tyres width 2510 mm and 2500 mm
      Wheelbase 6219 mm and 7300 mm
      Blade base 2562 mm and 3050 mm
      Dual axis wheelbase 1594 mm and 1540 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 14.0 x 24 12PR TL G2 Firestone and 14.00 - 24 G-2 16PR
      Overall standard operating weight 13535 kg and 36376 kg
      Cooling system fluid volume 40 l. and 40 l.

      Motor

      Torque measured at 1500 rev / min and 1500 rev / min
      Cylinders number 6 and 6
      Displacement 6.7 l. and 6.7 l.
      Aspiration Turbocharging with charge air cooler and turbocharging and CAC
      Manufacturer Cummins and Cummins
      Model QSB 6.7, III Level III certified and QSB 6.7

      Hydraulic system

      Type of pump Gear pump with locking in the middle position, with load sensing and axial piston pump

      Gear box

      Transmission type Powershift of the camshaft with direct drive with electronic shift control and inching pedal and powershift transmission

      Front Axle

      Wheel tilt 17.5 degrees and 22 degrees
      General fluctuations 19 degrees and 40 degrees

      Dump

      Left lateral displacement 533 mm and 800 mm
      Mouldboard thickness 22.2 mm and 22 mm
      Lateral right shift 686 mm and 800 mm
      Mouldboard width 3658 mm and 3660 mm
      Mouldboard height 559 mm and 670 mm

      Circle

      Diameter 1752.6 mm and 1350 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3300 mm
      4. Wheelbase 6219 mm 4. Wheelbase 7300 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2562 mm 8. Blade base 3050 mm
      1. Dimensional length 8534 mm 1. Dimensional length 9540 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2500 mm