vs.

      Case 845 DHP vs. John Deere 670D

      6 reasons to buy Case 845 DHP:

      Operation

      Hydraulic system fluid volume 180 l. and 53 l. 71 % more or 127 l.
      Transmission fluid volume 25 l. and 22.7 l. 9 % more or 2.3 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Torque measured at 1500 rev / min and 1000 rev / min 33 % more or 500 rev

      Hydraulic system

      Pump flow rate 191.5 l/min and 207 l/min 7 % less or 15.5 l/min

      Gear box

      Maximum forward speed 42.9 km/h and 40 km/h 7 % more or 2.9 km/h

      17 reasons to buy John Deere 670D:

      Steerage

      Turn radius 7 m and 7.2 m 3 % less or 0.2 m

      Sizes

      Front part clearance 638 mm and 622 mm 3 % more or 16 mm

      Operation

      Circular gearbox fluid volume 5.7 l. and 2.8 l. 51 % more or 2.9 l.
      Cooling system fluid volume 45.4 l. and 40 l. 12 % more or 5.4 l.
      Each tandem case fluid volume 75.7 l. and 28.7 l. 62 % more or 47.0 l.
      Rear differential/final drive fluid volume 36 l. and 12 l. 67 % more or 24 l.
      Generator current strength 100 amperes and 80 amperes 20 % more or 20 amperes
      Front axle standard operating weight 3855 kg and 3707 kg 4 % more or 148 kg
      Rear axle standard operating weight 10663 kg and 9828 kg 8 % more or 835 kg
      Fuel Capacity 401.2 l. and 340.7 l. 15 % more or 60.5 l.

      Motor

      Effective drives torque 7-8 847 Nm and 746 Nm 12 % more or 101 Nm
      Displacement 6.8 l. and 6.7 l. 1 % more or 0.1 l.
      Effective speeds output 7-8 138 kW and 119 kW 14 % more or 19 kW
      Maximum power 138 kW and 119.3 kW 14 % more or 18.7 kW

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 40 km/h and 28.5 km/h 29 % more or 11.5 km/h

      Circle

      Maximum lifting above ground level 470 mm and 444.5 mm 5 % more or 25.5 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 22 degrees

      Sizes

      Wheelbase 6219 mm and 6120 mm
      Blade base 2562 mm and 2568 mm
      Dual axis wheelbase 1594 mm and 1540 mm
      Height to cab upper part 3340 mm and 3180 mm
      Dimensional length 8534 mm and 8804 mm
      Between tyres width 2510 mm and 2510 mm

      Operation

      Tyre size 14.0 x 24 12PR TL G2 Firestone and 14.00-24 12PR
      Operating voltage 24 V and 24 V
      Overall standard operating weight 13535 kg and 14519 kg

      Motor

      Manufacturer Cummins and John Deere
      Model QSB 6.7, III Level III certified and 6068H
      Aspiration Turbocharging with charge air cooler and Turbocharged engine with subsequent cooling of charging air by oncoming air flow
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Gear pump with locking in the middle position, with load sensing and variable displacement piston pump

      Gear box

      Transmission type Powershift of the camshaft with direct drive with electronic shift control and inching pedal and Powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 17.5 degrees and 20 degrees
      General fluctuations 19 degrees and 32 degrees

      Dump

      Mouldboard width 3658 mm and 3660 mm
      Mouldboard height 559 mm and 610 mm
      Mouldboard thickness 22.2 mm and 22 mm
      Left lateral displacement 533 mm and 680 mm
      Lateral right shift 686 mm and 680 mm

      Circle

      Diameter 1752.6 mm and 1524 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3180 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6120 mm
      6. Front part clearance 622 mm 6. Front part clearance 638 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2562 mm 8. Blade base 2568 mm
      1. Dimensional length 8534 mm 1. Dimensional length 8804 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2510 mm