vs.

      Case 845 DHP vs. Volvo G710B

      6 reasons to buy Case 845 DHP:

      Operation

      Generator current strength 80 amperes and 75 amperes 6 % more or 5 amperes
      Hydraulic system fluid volume 180 l. and 134 l. 26 % more or 46 l.

      Motor

      Torque measured at 1500 rev / min and 1400 rev / min 7 % more or 100 rev

      Hydraulic system

      Pump flow rate 191.5 l/min and 284 l/min 33 % less or 92.5 l/min

      Gear box

      Maximum forward speed 42.9 km/h and 40.1 km/h 7 % more or 2.8 km/h

      Circle

      Maximum lifting above ground level 444.5 mm and 431.8 mm 3 % more or 12.7 mm

      13 reasons to buy Volvo G710B:

      Operation

      Fuel Capacity 378.5 l. and 340.7 l. 10 % more or 37.8 l.
      Cooling system fluid volume 47 l. and 40 l. 15 % more or 7 l.
      Transmission fluid volume 38 l. and 25 l. 34 % more or 13 l.
      Rear differential/final drive fluid volume 23 l. and 12 l. 48 % more or 11 l.
      Front axle standard operating weight 4394 kg and 3707 kg 16 % more or 687 kg
      Rear axle standard operating weight 10757 kg and 9828 kg 9 % more or 929 kg
      Each tandem case fluid volume 100 l. and 28.7 l. 71 % more or 71.3 l.

      Motor

      Effective speeds output 7-8 129 kW and 119 kW 8 % more or 10 kW
      Maximum power 129 kW and 119.3 kW 8 % more or 9.7 kW
      Effective drives torque 7-8 801.3 Nm and 746 Nm 7 % more or 55.3 Nm
      Displacement 7.1 l. and 6.7 l. 6 % more or 0.4 l.

      Gear box

      Maximum reverse gear 28.6 km/h and 28.5 km/h 0 % more or 0.1 km/h

      Dump

      Maximum cutting depth 812.8 mm and 711.2 mm 12 % more or 101.6 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 22 degrees

      Sizes

      Height to cab upper part 3340 mm and 3073 mm
      Dimensional length 8534 mm and 9093 mm
      Between tyres width 2510 mm and 2489 mm
      Wheelbase 6219 mm and 6096 mm
      Blade base 2562 mm and 2616 mm

      Operation

      Operating voltage 24 V and 24 V
      Overall standard operating weight 13535 kg and 15150 kg
      Tyre size 14.0 x 24 12PR TL G2 Firestone and 13.00 x 24, G-2

      Motor

      Manufacturer Cummins and Volvo
      Model QSB 6.7, III Level III certified and D7DGAE2
      Aspiration Turbocharging with charge air cooler and turbocharging
      Power measured at 2200 rev / min and 2200 rev / min

      Hydraulic system

      Type of pump Gear pump with locking in the middle position, with load sensing and hydraulic system with load sensing

      Gear box

      Transmission type Powershift of the camshaft with direct drive with electronic shift control and inching pedal and powershift transmission
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 17.5 degrees and 18 degrees
      General fluctuations 19 degrees and 16 degrees

      Dump

      Mouldboard width 3658 mm and 3657.6 mm
      Mouldboard height 559 mm and 635 mm
      Mouldboard thickness 22.2 mm and 22.2 mm
      Left lateral displacement 533 mm and 673.1 mm
      Lateral right shift 686 mm and 673.1 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Diameter 1752.6 mm and 1683 mm

      Images

      Sizes

      1. Dimensional length 8534 mm 1. Dimensional length 9093 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2489 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3073 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6096 mm
      8. Blade base 2562 mm 8. Blade base 2616 mm