- Home/
- Comparison/
- Grader/
- Case 845 DHP vs. Volvo G720
Case 845 DHP vs. Volvo G720
3 reasons to buy Case 845 DHP:
Steerage
Turn radius | 7.2 m and 7.8 m | 8 % less or 0.6 m |
Operation
Hydraulic system fluid volume | 180 l. and 90 l. | 50 % more or 90 l. |
Dump
Maximum cutting depth | 711.2 mm and 444.5 mm | 37 % more or 266.7 mm |
13 reasons to buy Volvo G720:
Operation
Transmission fluid volume | 38 l. and 25 l. | 34 % more or 13 l. |
Front axle standard operating weight | 4361 kg and 3707 kg | 15 % more or 654 kg |
Rear differential/final drive fluid volume | 23 l. and 12 l. | 48 % more or 11 l. |
Rear axle standard operating weight | 10415 kg and 9828 kg | 6 % more or 587 kg |
Each tandem case fluid volume | 100 l. and 28.7 l. | 71 % more or 71.3 l. |
Fuel Capacity | 387.5 l. and 340.7 l. | 12 % more or 46.8 l. |
Cooling system fluid volume | 47 l. and 40 l. | 15 % more or 7 l. |
Motor
Displacement | 8.3 l. and 6.7 l. | 19 % more or 1.6 l. |
Effective speeds output 7-8 | 119.3 kW and 119 kW | 0 % more or 0.3 kW |
Effective drives torque 7-8 | 759.3 Nm and 746 Nm | 2 % more or 13.3 Nm |
Hydraulic system
Pump flow rate | 191 l/min and 191.5 l/min | 0 % less or 0.5 l/min |
Gear box
Maximum forward speed | 45.7 km/h and 42.9 km/h | 6 % more or 2.8 km/h |
Maximum reverse gear | 32.7 km/h and 28.5 km/h | 13 % more or 4.2 km/h |
Neutral reasons:
Steerage
Left and right hinge connection | 25 degrees and 72 degrees |
Sizes
Height to cab upper part | 3340 mm and 3099 mm |
Dimensional length | 8534 mm and 8484 mm |
Between tyres width | 2510 mm and 2540 mm |
Wheelbase | 6219 mm and 6096 mm |
Blade base | 2562 mm and 2591 mm |
Operation
Overall standard operating weight | 13535 kg and 14774 kg |
Operating voltage | 24 V and 24 V |
Motor
Aspiration | Turbocharging with charge air cooler and turbocharging |
Manufacturer | Cummins and Cummins |
Model | QSB 6.7, III Level III certified and 6C8.3 |
Cylinders number | 6 and 6 |
Maximum power | 119.3 kW and 119.3 kW |
Hydraulic system
Type of pump | Gear pump with locking in the middle position, with load sensing and hydraulic system with load sensing |
Gear box
Transmission type | Powershift of the camshaft with direct drive with electronic shift control and inching pedal and Volvo 8400 |
Forward gears number | 8 and 8 |
Reverse gears number | 4 and 4 |
Front Axle
Wheel tilt | 17.5 degrees and 18 degrees |
General fluctuations | 19 degrees and 16 degrees |
Dump
Lateral right shift | 686 mm and 673.1 mm |
Mouldboard width | 3658 mm and 3657.6 mm |
Mouldboard height | 559 mm and 635 mm |
Mouldboard thickness | 22.2 mm and 22.2 mm |
Left lateral displacement | 533 mm and 673.1 mm |
Circle
Rotating | 360 degrees and 360 degrees |
Images
Sizes
1. Dimensional length | 8534 mm | 1. Dimensional length | 8484 mm |
2. Between tyres width | 2510 mm | 2. Between tyres width | 2540 mm |
3. Height to cab upper part | 3340 mm | 3. Height to cab upper part | 3099 mm |
4. Wheelbase | 6219 mm | 4. Wheelbase | 6096 mm |
8. Blade base | 2562 mm | 8. Blade base | 2591 mm |