vs.

      Case 845B DHP vs. Caterpillar 140G

      8 reasons to buy Case 845B DHP:

      Operation

      Hydraulic system fluid volume 179.8 l. and 68 l. 62 % more or 111.8 l.
      Generator current strength 90 amperes and 40 amperes 56 % more or 50 amperes
      Fuel Capacity 340.7 l. and 284 l. 17 % more or 56.7 l.
      Oil system fluid volume 70 l. and 29.3 l. 58 % more or 40.7 l.

      Hydraulic system

      Pump flow rate 185.5 l/min and 193.1 l/min 4 % less or 7.6 l/min

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Maximum forward speed 42.8 km/h and 41 km/h 4 % more or 1.8 km/h

      Dump

      Maximum cutting depth 711.2 mm and 438 mm 38 % more or 273.2 mm

      5 reasons to buy Caterpillar 140G:

      Operation

      Cooling system fluid volume 47.3 l. and 39.7 l. 16 % more or 7.6 l.

      Motor

      Displacement 10.5 l. and 6.7 l. 36 % more or 3.8 l.

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum reverse gear 41 km/h and 28.5 km/h 30 % more or 12.5 km/h

      Circle

      Maximum lifting above ground level 464 mm and 444.5 mm 4 % more or 19.5 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 50 degrees
      Turn radius 7.3 m and 7.3 m

      Sizes

      Wheelbase 6219 mm and 5920 mm
      Blade base 2562 mm and 2570 mm
      Dual axis wheelbase 1572 mm and 1520 mm
      Height to cab upper part 3340 mm and 3360 mm
      Dimensional length 8534.4 mm and 8310 mm
      Between tyres width 2499 mm and 2440 mm

      Operation

      Tyre size 14.0 x 24-10 PR and 14x24 10PR
      Operating voltage 24 V and 24 V
      Overall standard operating weight 14605.2 kg and 12620 kg

      Motor

      Manufacturer Case and Caterpillar
      Model FPT 6.7L and 3306
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump piston type with load sensing and Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume

      Gear box

      Transmission type Powershift transmission with direct drive and powershift transmission with direct drive

      Front Axle

      General fluctuations 15.3 degrees and 32 degrees
      Wheel tilt 20 degrees and 18 degrees

      Dump

      Mouldboard width 3657.6 mm and 3660 mm
      Lateral right shift 685.8 mm and 660 mm
      Mouldboard height 558.8 mm and 610 mm
      Mouldboard thickness 22 mm and 22 mm
      Left lateral displacement 533.4 mm and 660 mm

      Circle

      Diameter 1752.6 mm and 1530 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8534.4 mm 1. Dimensional length 8310 mm
      2. Between tyres width 2499 mm 2. Between tyres width 2440 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3360 mm
      4. Wheelbase 6219 mm 4. Wheelbase 5920 mm
      7. Dual axis wheelbase 1572 mm 7. Dual axis wheelbase 1520 mm
      8. Blade base 2562 mm 8. Blade base 2570 mm