vs.

      Case 845B DHP vs. New Holland F156.6

      15 reasons to buy Case 845B DHP:

      Steerage

      Turn radius 7.3 m and 8250 m 100 % less or 8242.7 m

      Sizes

      Rear ground clearance 380 mm and 328 mm 14 % more or 52 mm
      Front part clearance 622 mm and 141 mm 77 % more or 481 mm

      Operation

      Generator current strength 90 amperes and 70 amperes 22 % more or 20 amperes
      Rear axle standard operating weight 10109.2 kg and 9841 kg 3 % more or 268.2 kg
      Fuel Capacity 340.7 l. and 275 l. 19 % more or 65.7 l.
      Oil system fluid volume 70 l. and 12.5 l. 82 % more or 57.5 l.
      Transmission fluid volume 79.5 l. and 21 l. 74 % more or 58.5 l.

      Motor

      Displacement 6.7 l. and 5.9 l. 12 % more or 0.8 l.
      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1
      Maximum forward speed 42.8 km/h and 37.4 km/h 13 % more or 5.4 km/h
      Maximum reverse gear 28.5 km/h and 27.1 km/h 5 % more or 1.4 km/h

      Dump

      Maximum cutting depth 711.2 mm and 500 mm 30 % more or 211.2 mm

      4 reasons to buy New Holland F156.6:

      Operation

      Hydraulic system fluid volume 185 l. and 179.8 l. 3 % more or 5.2 l.
      Each tandem case fluid volume 68 l. and 60.2 l. 11 % more or 7.8 l.

      Hydraulic system

      Pump flow rate 126 l/min and 185.5 l/min 32 % less or 59.5 l/min

      Circle

      Maximum lifting above ground level 480 mm and 444.5 mm 7 % more or 35.5 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 28 degrees

      Sizes

      Height to cab upper part 3340 mm and 3373 mm
      Dimensional length 8534.4 mm and 9975 mm
      Between tyres width 2499 mm and 2595 mm
      Wheelbase 6219 mm and 5983 mm
      Blade base 2562 mm and 2504 mm
      Dual axis wheelbase 1572 mm and 1544 mm

      Operation

      Tyre size 14.0 x 24-10 PR and 17.5R25EM
      Operating voltage 24 V and 24 V
      Front axle standard operating weight 4496 kg and 4496 kg
      Overall standard operating weight 14605.2 kg and 14336 kg

      Motor

      Cylinders number 6 and 6
      Aspiration Turbocharged engine with subsequent cooling of charging air by oncoming air flow and turbocharging water cooling
      Model FPT 6.7L and CNH 4-stroke cycle, naturally aspirated diesel engine

      Hydraulic system

      Type of pump piston type with load sensing and Axial cam pump, variable displacement piston pump

      Gear box

      Transmission type Powershift transmission with direct drive and powershift transmission

      Front Axle

      Wheel tilt 20 degrees and 21 degrees
      General fluctuations 15.3 degrees and 15 degrees

      Dump

      Mouldboard thickness 22 mm and 19 mm
      Left lateral displacement 533.4 mm and 645 mm
      Lateral right shift 685.8 mm and 755 mm
      Mouldboard width 3657.6 mm and 3660 mm
      Mouldboard height 558.8 mm and 152 mm

      Circle

      Rotating 360 degrees and degrees

      Images

      Sizes

      1. Dimensional length 8534.4 mm 1. Dimensional length 9975 mm
      2. Between tyres width 2499 mm 2. Between tyres width 2595 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3373 mm
      4. Wheelbase 6219 mm 4. Wheelbase 5983 mm
      5. Rear ground clearance 380 mm 5. Rear ground clearance 328 mm
      6. Front part clearance 622 mm 6. Front part clearance 141 mm
      7. Dual axis wheelbase 1572 mm 7. Dual axis wheelbase 1544 mm
      8. Blade base 2562 mm 8. Blade base 2504 mm