vs.

      Case 865 DHP vs. Caterpillar 140M2 AWD

      7 reasons to buy Case 865 DHP:

      Steerage

      Turn radius 7.2 m and 7.8 m 8 % less or 0.6 m

      Sizes

      Rear ground clearance 380 mm and 344 mm 9 % more or 36 mm
      Front part clearance 622 mm and 600 mm 4 % more or 22 mm

      Operation

      Hydraulic system fluid volume 180 l. and 100 l. 44 % more or 80 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Hydraulic system

      Pump flow rate 185.5 l/min and 210.8 l/min 12 % less or 25.3 l/min

      Front Axle

      Clearance 622 mm and 600 mm 4 % more or 22 mm

      17 reasons to buy Caterpillar 140M2 AWD:

      Operation

      Circular gearbox fluid volume 7 l. and 2.8 l. 60 % more or 4.2 l.
      Each tandem case fluid volume 64 l. and 28.7 l. 55 % more or 35.3 l.
      Fuel Capacity 416 l. and 341 l. 18 % more or 75 l.
      Oil system fluid volume 30 l. and 21.1 l. 30 % more or 8.9 l.
      Cooling system fluid volume 56 l. and 40 l. 29 % more or 16 l.
      Transmission fluid volume 65 l. and 27 l. 58 % more or 38 l.
      Front axle standard operating weight 4392.6 kg and 4250.2 kg 3 % more or 142.4 kg
      Rear axle standard operating weight 13710.7 kg and 10299.7 kg 25 % more or 3411.0 kg

      Motor

      Torque measured at 2100 rev / min and 1500 rev / min 29 % more or 600 rev
      Effective speeds output 7-8 181.2 kW and 149.1 kW 18 % more or 32.1 kW
      Effective drives torque 7-8 1247.4 Nm and 814.8 Nm 35 % more or 432.6 Nm
      Displacement 9.3 l. and 5.9 l. 37 % more or 3.4 l.

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 46.6 km/h and 42.8 km/h 8 % more or 3.8 km/h
      Maximum reverse gear 36.8 km/h and 28.5 km/h 23 % more or 8.3 km/h

      Dump

      Maximum cutting depth 715 mm and 711.2 mm 1 % more or 3.8 mm

      Circle

      Maximum lifting above ground level 480 mm and 444.5 mm 7 % more or 35.5 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 20 degrees

      Sizes

      Height to cab upper part 3340 mm and 3287 mm
      Between tyres width 2510 mm and 2581 mm
      Dimensional length 8534 mm and 8898 mm
      Wheelbase 6219 mm and 6126 mm
      Blade base 2562 mm and 2557 mm
      Dual axis wheelbase 1594 mm and 1523 mm

      Operation

      Overall standard operating weight 14549.9 kg and 18103.3 kg

      Motor

      Manufacturer Cummins and Caterpillar
      Model QSB-5.9 and C9.3 ACERT VHP

      Hydraulic system

      Type of pump piston type with load sensing and variable displacement piston pump

      Gear box

      Transmission type powershift and Powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 17.5 degrees and 18 degrees
      General fluctuations 19 degrees and 32 degrees

      Dump

      Mouldboard height 600 mm and 609.6 mm
      Mouldboard thickness 22.2 mm and 22 mm
      Mouldboard width 3962 mm and 3657.6 mm
      Left lateral displacement 533 mm and 510 mm
      Lateral right shift 686 mm and 660 mm
      Lowered blade pressure 7606 kg and 10380 kg

      Circle

      Diameter 1752 mm and 1530 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      5. Rear ground clearance 380 mm 5. Rear ground clearance 344 mm
      6. Front part clearance 622 mm 6. Front part clearance 600 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1523 mm
      8. Blade base 2562 mm 8. Blade base 2557 mm
      1. Dimensional length 8534 mm 1. Dimensional length 8898 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2581 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3287 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6126 mm