vs.

      Case 865 DHP vs. Komatsu GD655-5

      8 reasons to buy Case 865 DHP:

      Steerage

      Turn radius 7.2 m and 7.4 m 3 % less or 0.2 m

      Sizes

      Front part clearance 622 mm and 620 mm 0 % more or 2 mm

      Operation

      Cooling system fluid volume 40 l. and 25 l. 37 % more or 15 l.
      Hydraulic system fluid volume 180 l. and 69 l. 62 % more or 111 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Hydraulic system

      Pump flow rate 185.5 l/min and 200 l/min 7 % less or 14.5 l/min

      Front Axle

      Clearance 622 mm and 620 mm 0 % more or 2 mm

      Dump

      Maximum cutting depth 711.2 mm and 615 mm 14 % more or 96.2 mm

      14 reasons to buy Komatsu GD655-5:

      Operation

      Circular gearbox fluid volume 7 l. and 2.8 l. 60 % more or 4.2 l.
      Each tandem case fluid volume 57 l. and 28.7 l. 50 % more or 28.3 l.
      Fuel Capacity 416 l. and 341 l. 18 % more or 75 l.
      Oil system fluid volume 23 l. and 21.1 l. 8 % more or 1.9 l.
      Front axle standard operating weight 4453 kg and 4250.2 kg 5 % more or 202.8 kg
      Rear axle standard operating weight 11582 kg and 10299.7 kg 11 % more or 1282.3 kg
      Transmission fluid volume 45 l. and 27 l. 40 % more or 18 l.
      Rear differential/final drive fluid volume 17 l. and 12 l. 29 % more or 5 l.

      Motor

      Effective speeds output 7-8 162.6 kW and 149.1 kW 8 % more or 13.5 kW
      Maximum power 162.6 kW and 149.1 kW 8 % more or 13.5 kW
      Displacement 6.7 l. and 5.9 l. 12 % more or 0.8 l.

      Gear box

      Maximum forward speed 44.3 km/h and 42.8 km/h 3 % more or 1.5 km/h
      Maximum reverse gear 40.2 km/h and 28.5 km/h 29 % more or 11.7 km/h

      Circle

      Maximum lifting above ground level 480 mm and 444.5 mm 7 % more or 35.5 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Dual axis wheelbase 1594 mm and 1524 mm
      Height to cab upper part 3340 mm and 3200 mm
      Dimensional length 8534 mm and 9205 mm
      Between tyres width 2510 mm and 2485 mm
      Wheelbase 6219 mm and 6480 mm
      Blade base 2562 mm and 2580 mm

      Operation

      Overall standard operating weight 14549.9 kg and 16035 kg
      Tyre size 14.0x24 12PR TL G2 Firestone and 17.5R25

      Motor

      Cylinders number 6 and 6
      Manufacturer Cummins and Komatsu
      Model QSB-5.9 and SAA6D107E-1
      Aspiration Turbocharger with air cooling by oncoming air flow and Turbocharging with subsequent air cooling (by a cooling radiator)

      Gear box

      Transmission type powershift and powershift
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 17.5 degrees and 16 degrees
      General fluctuations 19 degrees and 32 degrees

      Dump

      Mouldboard width 3962 mm and 4320 mm
      Mouldboard height 600 mm and 660 mm
      Mouldboard thickness 22.2 mm and 22 mm
      Left lateral displacement 533 mm and 820 mm
      Lateral right shift 686 mm and 820 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Diameter 1752 mm and 1530 mm

      Images

      Sizes

      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1524 mm
      8. Blade base 2562 mm 8. Blade base 2580 mm
      1. Dimensional length 8534 mm 1. Dimensional length 9205 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2485 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6480 mm
      6. Front part clearance 622 mm 6. Front part clearance 620 mm