vs.

      Case 865 DHP vs. Volvo G730

      4 reasons to buy Case 865 DHP:

      Operation

      Hydraulic system fluid volume 180 l. and 90 l. 50 % more or 90 l.
      Generator current strength 80 amperes and 75 amperes 6 % more or 5 amperes

      Hydraulic system

      Pump flow rate 185.5 l/min and 191 l/min 3 % less or 5.5 l/min

      Front Axle

      Clearance 622 mm and 610 mm 2 % more or 12 mm

      14 reasons to buy Volvo G730:

      Operation

      Front axle standard operating weight 4806 kg and 4250.2 kg 12 % more or 555.8 kg
      Rear axle standard operating weight 10957 kg and 10299.7 kg 6 % more or 657.3 kg
      Fuel Capacity 378.5 l. and 341 l. 10 % more or 37.5 l.
      Cooling system fluid volume 47 l. and 40 l. 15 % more or 7 l.
      Transmission fluid volume 38 l. and 27 l. 29 % more or 11 l.
      Rear differential/final drive fluid volume 23 l. and 12 l. 48 % more or 11 l.
      Each tandem case fluid volume 100 l. and 28.7 l. 71 % more or 71.3 l.

      Motor

      Effective speeds output 7-8 152.9 kW and 149.1 kW 2 % more or 3.8 kW
      Maximum power 152.9 kW and 149.1 kW 2 % more or 3.8 kW
      Effective drives torque 7-8 862.3 Nm and 814.8 Nm 6 % more or 47.5 Nm
      Displacement 8.3 l. and 5.9 l. 29 % more or 2.4 l.

      Gear box

      Maximum reverse gear 32.8 km/h and 28.5 km/h 13 % more or 4.3 km/h
      Maximum forward speed 45.9 km/h and 42.8 km/h 7 % more or 3.1 km/h

      Dump

      Maximum cutting depth 812.8 mm and 711.2 mm 12 % more or 101.6 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 22 degrees

      Sizes

      Height to cab upper part 3340 mm and 3099 mm
      Dimensional length 8534 mm and 8484 mm
      Between tyres width 2510 mm and 2540 mm
      Wheelbase 6219 mm and 6096 mm
      Blade base 2562 mm and 2591 mm

      Operation

      Overall standard operating weight 14549.9 kg and 15763 kg
      Tyre size 14.0x24 12PR TL G2 Firestone and 14.00 x 24, G-2
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Cummins and Cummins
      Model QSB-5.9 and 6C8.3
      Aspiration Turbocharger with air cooling by oncoming air flow and turbocharging

      Hydraulic system

      Type of pump piston type with load sensing and hydraulic system with load sensing

      Gear box

      Transmission type powershift and powershift transmission
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 17.5 degrees and 18 degrees
      General fluctuations 19 degrees and 16 degrees

      Dump

      Lowered blade pressure 7606 kg and 8357.9 kg
      Mouldboard width 3962 mm and 3657.6 mm
      Mouldboard height 600 mm and 635 mm
      Mouldboard thickness 22.2 mm and 22.2 mm
      Left lateral displacement 533 mm and 673.1 mm
      Lateral right shift 686 mm and 673.1 mm

      Circle

      Maximum lifting above ground level 444.5 mm and 444.5 mm
      Diameter 1752 mm and 1683 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8534 mm 1. Dimensional length 8484 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2540 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3099 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6096 mm
      8. Blade base 2562 mm 8. Blade base 2591 mm