vs.

      Case 865 VHP vs. Case 845B DHP

      7 reasons to buy Case 865 VHP:

      Operation

      Rear axle standard operating weight 10342 kg and 10109.2 kg 2 % more or 232.8 kg
      Cooling system fluid volume 40 l. and 39.7 l. 1 % more or 0.3 l.
      Hydraulic system fluid volume 190 l. and 179.8 l. 5 % more or 10.2 l.

      Motor

      Effective speeds output 7-8 152.9 kW and 119.3 kW 22 % more or 33.6 kW
      Effective drives torque 7-8 881 Nm and 759.3 Nm 14 % more or 121.7 Nm

      Hydraulic system

      Pump flow rate 143.5 l/min and 185.5 l/min 23 % less or 42.0 l/min

      Gear box

      Maximum forward speed 42.9 km/h and 42.8 km/h 0 % more or 0.1 km/h

      6 reasons to buy Case 845B DHP:

      Operation

      Each tandem case fluid volume 60.2 l. and 28.7 l. 52 % more or 31.5 l.
      Oil system fluid volume 70 l. and 17.8 l. 75 % more or 52.2 l.
      Generator current strength 90 amperes and 80 amperes 11 % more or 10 amperes
      Transmission fluid volume 79.5 l. and 23 l. 71 % more or 56.5 l.
      Front axle standard operating weight 4496 kg and 4293 kg 5 % more or 203 kg
      Rear differential/final drive fluid volume 39.7 l. and 12 l. 70 % more or 27.7 l.

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees
      Turn radius 7.3 m and 7.3 m

      Sizes

      Height to cab upper part 3340 mm and 3340 mm
      Dimensional length 8534 mm and 8534.4 mm
      Between tyres width 2510 mm and 2499 mm
      Wheelbase 6219 mm and 6219 mm
      Blade base 2562 mm and 2562 mm
      Dual axis wheelbase 1594 mm and 1572 mm
      Rear ground clearance 380 mm and 380 mm
      Front part clearance 622 mm and 622 mm

      Operation

      Overall standard operating weight 14635 kg and 14605.2 kg
      Tyre size 14.0 x 24 12PR TL G2 Firestone and 14.0 x 24-10 PR
      Fuel Capacity 340.7 l. and 340.7 l.
      Operating voltage 24 V and 24 V
      Circular gearbox fluid volume 2.8 l. and 2.8 l.

      Motor

      Cylinders number 6 and 6
      Displacement 6.7 l. and 6.7 l.
      Aspiration turbocharging / air cooling and Turbocharged engine with subsequent cooling of charging air by oncoming air flow
      Manufacturer Cummins and Case
      Model QSB-6.7, III Level III certified and FPT 6.7L
      Power measured at 2200 rev / min and 2200 rev / min
      Torque measured at 1500 rev / min and 1500 rev / min

      Hydraulic system

      Type of pump Piston pump with locking in the middle position, with load sensing and piston type with load sensing

      Gear box

      Maximum reverse gear 28.5 km/h and 28.5 km/h
      Transmission type direct drive, powershift, camshaft and Powershift transmission with direct drive
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 17.5 degrees and 20 degrees
      General fluctuations 19 degrees and 15.3 degrees

      Dump

      Left lateral displacement 533 mm and 533.4 mm
      Lateral right shift 686 mm and 685.8 mm
      Mouldboard width 3962 mm and 3657.6 mm
      Mouldboard height 600 mm and 558.8 mm
      Mouldboard thickness 22.2 mm and 22 mm
      Maximum cutting depth 711.2 mm and 711.2 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Diameter 1752 mm and 1752.6 mm
      Maximum lifting above ground level 444.5 mm and 444.5 mm

      Images

      Sizes

      1. Dimensional length 8534 mm 1. Dimensional length 8534.4 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2499 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6219 mm
      5. Rear ground clearance 380 mm 5. Rear ground clearance 380 mm
      6. Front part clearance 622 mm 6. Front part clearance 622 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1572 mm
      8. Blade base 2562 mm 8. Blade base 2562 mm