vs.

      Case 865 VHP vs. New Holland F156.6

      17 reasons to buy Case 865 VHP:

      Steerage

      Turn radius 7.3 m and 8250 m 100 % less or 8242.7 m

      Sizes

      Rear ground clearance 380 mm and 328 mm 14 % more or 52 mm
      Front part clearance 622 mm and 141 mm 77 % more or 481 mm

      Operation

      Fuel Capacity 340.7 l. and 275 l. 19 % more or 65.7 l.
      Hydraulic system fluid volume 190 l. and 185 l. 3 % more or 5 l.
      Transmission fluid volume 23 l. and 21 l. 9 % more or 2 l.
      Generator current strength 80 amperes and 70 amperes 12 % more or 10 amperes
      Rear axle standard operating weight 10342 kg and 9841 kg 5 % more or 501 kg
      Oil system fluid volume 17.8 l. and 12.5 l. 30 % more or 5.3 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev
      Maximum power 152.9 kW and 130.5 kW 15 % more or 22.4 kW
      Displacement 6.7 l. and 5.9 l. 12 % more or 0.8 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1
      Maximum forward speed 42.9 km/h and 37.4 km/h 13 % more or 5.5 km/h
      Maximum reverse gear 28.5 km/h and 27.1 km/h 5 % more or 1.4 km/h

      Dump

      Maximum cutting depth 711.2 mm and 500 mm 30 % more or 211.2 mm

      4 reasons to buy New Holland F156.6:

      Operation

      Each tandem case fluid volume 68 l. and 28.7 l. 58 % more or 39.3 l.
      Front axle standard operating weight 4496 kg and 4293 kg 5 % more or 203 kg

      Hydraulic system

      Pump flow rate 126 l/min and 143.5 l/min 12 % less or 17.5 l/min

      Circle

      Maximum lifting above ground level 480 mm and 444.5 mm 7 % more or 35.5 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 28 degrees

      Sizes

      Between tyres width 2510 mm and 2595 mm
      Wheelbase 6219 mm and 5983 mm
      Blade base 2562 mm and 2504 mm
      Dual axis wheelbase 1594 mm and 1544 mm
      Height to cab upper part 3340 mm and 3373 mm
      Dimensional length 8534 mm and 9975 mm

      Operation

      Tyre size 14.0 x 24 12PR TL G2 Firestone and 17.5R25EM
      Operating voltage 24 V and 24 V
      Overall standard operating weight 14635 kg and 14336 kg

      Motor

      Cylinders number 6 and 6
      Model QSB-6.7, III Level III certified and CNH 4-stroke cycle, naturally aspirated diesel engine
      Aspiration turbocharging / air cooling and turbocharging water cooling

      Hydraulic system

      Overflow valve pressure 0 kPa and 20000 kPa
      Type of pump Piston pump with locking in the middle position, with load sensing and Axial cam pump, variable displacement piston pump

      Gear box

      Transmission type direct drive, powershift, camshaft and powershift transmission

      Front Axle

      Wheel tilt 17.5 degrees and 21 degrees
      General fluctuations 19 degrees and 15 degrees

      Dump

      Mouldboard width 3962 mm and 3660 mm
      Mouldboard height 600 mm and 152 mm
      Mouldboard thickness 22.2 mm and 19 mm
      Left lateral displacement 533 mm and 645 mm
      Lateral right shift 686 mm and 755 mm

      Circle

      Rotating 360 degrees and degrees

      Images

      Sizes

      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1544 mm
      8. Blade base 2562 mm 8. Blade base 2504 mm
      1. Dimensional length 8534 mm 1. Dimensional length 9975 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2595 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3373 mm
      4. Wheelbase 6219 mm 4. Wheelbase 5983 mm
      5. Rear ground clearance 380 mm 5. Rear ground clearance 328 mm
      6. Front part clearance 622 mm 6. Front part clearance 141 mm