vs.

      Case 865 VHP vs. Volvo G746B

      5 reasons to buy Case 865 VHP:

      Operation

      Cooling system fluid volume 40 l. and 31 l. 22 % more or 9 l.
      Hydraulic system fluid volume 190 l. and 134 l. 29 % more or 56 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev
      Torque measured at 1500 rev / min and 1100 rev / min 27 % more or 400 rev

      Hydraulic system

      Pump flow rate 143.5 l/min and 284 l/min 49 % less or 140.5 l/min

      13 reasons to buy Volvo G746B:

      Operation

      Transmission fluid volume 38 l. and 23 l. 39 % more or 15 l.
      Rear differential/final drive fluid volume 23 l. and 12 l. 48 % more or 11 l.
      Each tandem case fluid volume 100 l. and 28.7 l. 71 % more or 71.3 l.
      Front axle standard operating weight 5205 kg and 4293 kg 18 % more or 912 kg
      Rear axle standard operating weight 12145 kg and 10342 kg 15 % more or 1803 kg
      Fuel Capacity 454 l. and 340.7 l. 25 % more or 113.3 l.

      Motor

      Maximum power 181.2 kW and 152.9 kW 16 % more or 28.3 kW
      Effective drives torque 7-8 1147 Nm and 881 Nm 23 % more or 266 Nm
      Displacement 9.6 l. and 6.7 l. 30 % more or 2.9 l.
      Effective speeds output 7-8 181.2 kW and 152.9 kW 16 % more or 28.3 kW

      Gear box

      Maximum forward speed 43.8 km/h and 42.9 km/h 2 % more or 0.9 km/h
      Maximum reverse gear 31.4 km/h and 28.5 km/h 9 % more or 2.9 km/h

      Dump

      Maximum cutting depth 812.8 mm and 711.2 mm 12 % more or 101.6 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 22 degrees

      Sizes

      Height to cab upper part 3340 mm and 3099 mm
      Dimensional length 8534 mm and 9220 mm
      Between tyres width 2510 mm and 2540 mm
      Wheelbase 6219 mm and 2718 mm
      Blade base 2562 mm and 2718 mm

      Operation

      Operating voltage 24 V and 24 V
      Generator current strength 80 amperes and 80 amperes
      Tyre size 14.0 x 24 12PR TL G2 Firestone and 14.00 x 24, G-2
      Overall standard operating weight 14635 kg and 17350 kg

      Motor

      Manufacturer Cummins and Volvo
      Model QSB-6.7, III Level III certified and D10BGAE2
      Aspiration turbocharging / air cooling and turbocharging

      Hydraulic system

      Overflow valve pressure 0 kPa and 18615.8 kPa
      Type of pump Piston pump with locking in the middle position, with load sensing and hydraulic system with load sensing

      Gear box

      Transmission type direct drive, powershift, camshaft and powershift transmission
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 17.5 degrees and 15 degrees
      General fluctuations 19 degrees and 16 degrees

      Dump

      Mouldboard thickness 22.2 mm and 25.4 mm
      Left lateral displacement 533 mm and 673.1 mm
      Lateral right shift 686 mm and 673.1 mm
      Mouldboard width 3962 mm and 3657.6 mm
      Mouldboard height 600 mm and 736.6 mm

      Circle

      Maximum lifting above ground level 444.5 mm and 444.5 mm
      Diameter 1752 mm and 1683 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      8. Blade base 2562 mm 8. Blade base 2718 mm
      1. Dimensional length 8534 mm 1. Dimensional length 9220 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2540 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3099 mm
      4. Wheelbase 6219 mm 4. Wheelbase 2718 mm