vs.

      Case 865 VHP vs. Volvo G86

      11 reasons to buy Case 865 VHP:

      Operation

      Front axle standard operating weight 4293 kg and 2400 kg 44 % more or 1893 kg
      Rear axle standard operating weight 10342 kg and 4630 kg 55 % more or 5712 kg
      Fuel Capacity 340.7 l. and 148 l. 57 % more or 192.7 l.
      Cooling system fluid volume 40 l. and 17 l. 57 % more or 23 l.
      Hydraulic system fluid volume 190 l. and 114 l. 40 % more or 76 l.

      Motor

      Maximum power 152.9 kW and 63.4 kW 59 % more or 89.5 kW
      Displacement 6.7 l. and 3.9 l. 42 % more or 2.8 l.
      Effective speeds output 7-8 152.9 kW and 63.4 kW 59 % more or 89.5 kW
      Cylinders number 6 and 4 33 % more or 2

      Gear box

      Maximum forward speed 42.9 km/h and 32 km/h 25 % more or 10.9 km/h

      Dump

      Maximum cutting depth 711.2 mm and 203 mm 71 % more or 508.2 mm

      6 reasons to buy Volvo G86:

      Steerage

      Turn radius 5 m and 7.3 m 32 % less or 2.3 m

      Operation

      Rear differential/final drive fluid volume 17 l. and 12 l. 29 % more or 5 l.
      Each tandem case fluid volume 68 l. and 28.7 l. 58 % more or 39.3 l.

      Motor

      Power measured at 2500 rev / min and 2200 rev / min 12 % more or 300 rev

      Hydraulic system

      Pump flow rate 91 l/min and 143.5 l/min 37 % less or 52.5 l/min

      Gear box

      Maximum reverse gear 32 km/h and 28.5 km/h 11 % more or 3.5 km/h

      Neutral reasons:

      Sizes

      Dimensional length 8534 mm and 6350 mm
      Between tyres width 2510 mm and 2362 mm
      Wheelbase 6219 mm and 4674 mm
      Blade base 2562 mm and 1880 mm

      Operation

      Overall standard operating weight 14635 kg and 7030 kg
      Tyre size 14.0 x 24 12PR TL G2 Firestone and 15X19.5, TL, G-2

      Motor

      Manufacturer Cummins and Cummins
      Model QSB-6.7, III Level III certified and 4B3.9

      Hydraulic system

      Type of pump Piston pump with locking in the middle position, with load sensing and single stream
      Overflow valve pressure 0 kPa and 12410.6 kPa

      Gear box

      Transmission type direct drive, powershift, camshaft and hydrostatic

      Front Axle

      Wheel tilt 17.5 degrees and 15 degrees
      General fluctuations 19 degrees and 35 degrees

      Dump

      Mouldboard thickness 22.2 mm and 15.9 mm
      Left lateral displacement 533 mm and 1473.2 mm
      Lateral right shift 686 mm and 1473.2 mm
      Mouldboard width 3962 mm and 3048 mm
      Mouldboard height 600 mm and 482.6 mm

      Circle

      Diameter 1752 mm and 990.6 mm
      Rotating 360 degrees and 120 degrees

      Images

      Sizes

      1. Dimensional length 8534 mm 1. Dimensional length 6350 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2362 mm
      4. Wheelbase 6219 mm 4. Wheelbase 4674 mm
      8. Blade base 2562 mm 8. Blade base 1880 mm